USB4 是 USB4 規範中指定的USB系統,USB開發者討論區於2019年8月29日發佈了其 1.0 版本。[1]

USB4 40Gbps 圖示

與以往的 USB 協定標準不同,USB4 需要USB-C連接器,並且要需要USB PD的支援以進行供電。與 USB 3.2 相比,它允許建立DisplayPortPCI Express隧道。這種架構定義了一種與多個終端裝置類型動態共用單個高速鏈路的方法,該方法能夠最好地按類型和應用處理數據傳輸。USB4產品必須支援20Gb/s的吞吐量,並可選擇性支援40或80Gb/s的吞吐量(上、下載速度對稱)。非對稱傳輸模式下,最高速度可達120Gb/s,另一方向則減至40Gb/s。由於進行了隧道傳輸,當傳輸混合數據時,即使只以 20 Gbit/s 的速率傳輸數據,實際的數據傳輸速率可能比USB 3.2更高。

USB4 規範基於Thunderbolt 3協定規範。[2]

總覽 編輯

名稱 編輯

USB4 規範版本 1.0(於2019年8月29日發佈)使用「Universal Serial Bus 4」(「通用序列匯流排 4」)和「USB4」的名稱。該版本發佈之前的一些新聞報道使用術語「USB 4.0」和「 USB 4」。[3][4] 即使在修訂版1.0發佈之後,有些人還是故意寫了「USB 4」,聲稱是「為了反映讀者搜尋的方式」。[5]

技術規範 編輯

USB4 規範 編輯

歷史 編輯

2019 年 3 月,USB4 首次正式宣佈。[6][7]

貢獻者 編輯

在 USB4 的 1.0 版發佈時,蘋果(Apple)、惠普(hp)、英特爾(Intel)、微軟(Microsoft)、瑞薩電子(Renesas)、意法半導體(ST)、德州儀器(TI)這些公司的員工參加了標準技術工作群組。

設計目標 編輯

USB4 規範中闡明的目標是更高的傳輸頻寬,幫助融合 USB-C 連接器的生態並「最大程度地減少終端用戶的困惑」。實現此目的的一些關鍵領域是使用單個類型的 USB-C 連接器,同時保持與現有 USB 和 Thunderbolt 產品的相容性。[8]

數據傳輸方式 編輯

USB4 本身不提供任何的通用數據傳輸機制或裝置類(這不像 USB 3.x),而是主要用於提供隧道以傳輸其他協定(如USB 3.2Displayport和可選的 PCIe)。儘管它確實提供了原生的「主機到主機」協定,但顧名思義,它僅在兩個連接的主機之間可用,並用於實現主機IP網絡。因此,當主機與裝置不支援可選的PCIe隧道傳輸時,最大非顯示頻寬被限制為USB 3.2 20Gbps,而僅有USB 3.2 10Gbps是強制實現。

USB4支援如下的隧道傳輸協定:

USB4還需要支援DisplayPortAlternate Mode(備選模式)。因此可以使用USB4隧道或該備選模式傳送DisplayPort訊號。[9]

USB-C連接器中的專用線始終支援USB 2.0

數據傳輸模式支援 編輯

某些傳輸模式是所有 USB4 裝置都支援的,但 USB4 對其他傳輸模式的支援是可選的。這取決於裝置的類型。

數據傳輸模式的支援情況[1]
類型 主機 集線器 外設
USB 2.0 (480 Mbit/s)
USB4 20 Gbit/s 傳輸
USB4 40 Gbit/s 傳輸 選擇性 選擇性
USB 3.2 (10 Gbit/s) 隧道 選擇性
USB 3.2 (20 Gbit/s) 隧道[10] 選擇性 選擇性 選擇性
DisplayPort隧道 選擇性
PCI Express隧道 選擇性 選擇性
主機到主機(Host-to-Host)通訊 不適用
DisplayPort Alternate Mode 選擇性
Thunderbolt Alternate Mode 選擇性 選擇性
USB-C Alternate Modes 選擇性 選擇性 選擇性
USB 數據傳輸模式 編輯
USB4 數據傳輸模式
名稱 圖示 規範 雙連結 編碼 速率
USB4 USB 3.2 USB 3.1[11] USB 3.0 Gbit/s GB/s
SuperSpeed USB 5Gbps   Does not appear USB 3.2 Gen 1×1 USB 3.1 Gen 1 USB 3.0 8b/10b 5 0.5
SuperSpeed USB 10Gbps   USB 3.2 Gen 2×1 USB 3.1 Gen 2 Does not appear 128b/132b 10 1.2
不適用 USB 3.2 Gen 1×2 Does not appear 8b/10b 10 1.0
SuperSpeed USB 20Gbps   USB 3.2 Gen 2×2 128b/132b 20 2.4
不適用 USB4 Gen 2×1 Does not appear 64b/66b[a] 10 1.2
不適用 USB4 Gen 3×1 128b/132b[a] 20 2.4
USB4 20Gbps   USB4 Gen 2×2 64b/66b[a] 20 2.4
USB4 40Gbps   USB4 Gen 3×2 128b/132b[a] 40 4.8
  1. ^ 1.0 1.1 1.2 1.3 USB4 能夠使用可選的里德-所羅門碼進行正向錯誤校正(RS FEC)。

USB4 Gen 2 與 USB 3.2 Gen 2 是不同的。它們僅有傳輸速率(10 Gbps)是相同的,但二者在電氣層上的編碼方式不同。

儘管 USB4 需要支援雙連結模式,但在其雙連結連接的初始化期間仍使用了單連結操作。如果此時發生通道繫結錯誤,單連結連接也可以用作備選模式。

在 Thunderbolt 相容模式下,根據 Thunderbolt 規格的要求,通道以 10.3125 Gbps(Gen 2)或 20.625 Gbps(Gen 3)的更高速率工作。

供電 編輯

在 USB4 連接的建立前,需要先完成USB Power Delivery(USB PD)協商。USB4 電源的每個介面必須提供至少 7.5W(5V,1.5A)的供電。在 USB PD 協商之前,USB4 裝置的耗電需要小於 250mA(預設)、1.5A 或 3A,5V (這取決於USB-C的電阻組態)。USB PD 最高可提供 100 W 的功率。[12]

Thunderbolt 3 相容性 編輯

USB4 標準指出,USB4 的設計目標是「保持與 USB 和 Thunderbolt 產品的現有生態系統的相容性」。但是與 Thunderbolt 3 的相容性僅對於 USB4 主機和 USB4 外設是可選的。

備用模式合作夥伴規格 編輯

DisplayPort Alt Mode 2.0 編輯

2020年4月29日,DisplayPort Alt Mode 2.0 發佈,它支援基於 USB4 的 DisplayPort 2.0。[13]

軟件支援 編輯

2020 年 3 月 29 日發佈的Linux5.6 支援 USB4。[14]

硬體支援 編輯

2020 年國際消費電子展(CES 2020)期間,USB-IF英特爾表示打算允許支援了所有可選功能的 USB4 產品作為Thunderbolt 4產品。預計首批與 USB4 相容的產品將是英特爾的Tiger Lake系列和AMDZen 3系列CPU,這些產品將於2020年末發佈。

支援 USB4 的裝置有望在 2020 年出現。[15][16]

USB Promoter Group 行政總裁 Brad Saunders 預計,大多數帶有 USB4 的個人電腦將支援 Thunderbolt 3。但對於手機,製造商不太可能實現對 Thunderbolt 3 的支援。[5]

2020年3月3日,賽普拉斯半導體宣佈推出支援 USB4 的新控制器。其中包括雙埠的 CCG6DF 和單埠的 CCG6SF。[17]

參考文獻 編輯

  1. ^ 1.0 1.1 USB Promoter Group USB4 Specification. usb.org. 2019-08-29 [2020-07-22]. (原始內容存檔於2021-02-13). 
  2. ^ Bright, Peter. Thunderbolt 3 becomes USB4, as Intel’s interconnect goes royalty-free. Ars Technica. 2019-03-04 [2019-03-04]. (原始內容存檔於2021-02-13) (美國英語). 
  3. ^ With USB 4, Thunderbolt and USB will converge. [2020-07-22]. (原始內容存檔於2022-09-10). 
  4. ^ Hagedoorn, Hilbert. USB 4.0 Will Arrive In Late 2020. Guru3D.com. [2020-07-22]. (原始內容存檔於2021-10-26). 
  5. ^ 5.0 5.1 September 2019, Avram Piltch 03. USB 4: Everything We Know So Far. Tom's Hardware. [2020-07-22]. (原始內容存檔於2021-06-30). 
  6. ^ Hill, Brandon. USB4 Leverages Thunderbolt 3 Protocol Doubling Speeds To 40Gbps. HotHardware. March 4, 2019 [2020-07-22]. (原始內容存檔於2021-10-23). 
  7. ^ USB4 announced with 40Gbps bandwidth, it's based on Thunderbolt 3. GSMArena.com. [2020-07-22]. (原始內容存檔於2022-01-15). 
  8. ^ USB4 Spec. p.1
  9. ^ USB4 - No more Mr. Nice Guy, your USB-C connector has to do it all! - #38. YouTube. 2019-11-21 [2020-05-01]. (原始內容存檔於2021-11-25). 
  10. ^ USB4 Spec 1.0 Sect 9 specifically mentions the requirement of "Superspeed Plus (=Gen 2x1) support for hubs and devices, the latter only if they optionally support USB3 tunneling. The rest of the spec doesn't mention the speed at all and more generically just refers to the whole USB3.2 architecture as "Enhanced Superspeed". Section 9.2.1 states the requirement to only support Gen 2x1 for the USB3 tunneling adapter, with Gen 2x2 being optional.
  11. ^ The New USB standard: USB 3.2 Explained. web.archive.org. February 20, 2020 [2020-07-22]. (原始內容存檔於2020-02-20). 
  12. ^ USB Type-C Spec 2.0 Section 5.3
  13. ^ Association (VESA), Video Electronics Standards. VESA Releases Updated DisplayPort™ Alt Mode Spec to Bring DisplayPort 2.0 Performance to USB4™ and New USB Type-C® Devices. www.prnewswire.com. [2020-07-22]. (原始內容存檔於2021-11-24). 
  14. ^ Linux 5.6 Kernel Released With WireGuard, USB4, New AMD + Intel Hardware Support - Phoronix. www.phoronix.com. [2020-07-22]. (原始內容存檔於2021-11-02). 
  15. ^ USB4 devices are clear to roll out next year. Engadget. [2020-07-22]. (原始內容存檔於2021-11-24). 
  16. ^ Maislinger, Florian. First USB 4 devices to be launched at the end of 2020. June 14, 2019 [2020-07-22]. (原始內容存檔於2021-11-24). 
  17. ^ Shilov, Anton. Cypress Announces USB 3.2 & USB4-Ready Controllers: EZ-PD CCG6DF & CCG6SF. www.anandtech.com. [2020-07-22]. (原始內容存檔於2021-12-06). 

外部連結 編輯