模板:Infobox settlement/sandbox/doc
此页面是Template:Infobox settlement/sandbox的模板文档。 此页面可能包含了模板的使用说明、分类和其他内容。 |
此模板使用Lua语言: |
This template is aliased or used as a sub-template for several infobox front-end templates. It should be used to produce an Infobox for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, et cetera—in fact, any subdivision below the level of a country, for which {{Infobox country}} should be used. Parameters are described in the table below. For questions, see the talk page. For a U.S. city guideline, see WP:USCITIES.
Usage
编辑- Important: Please enter all numeric values in a raw, unformatted fashion. References are to be included in their respective section footnotes field. Numeric values that are not "raw" may create an "Expression error". Raw values will be automatically formatted by the template. If you find a raw value is not formatted in your usage of the template, please post a notice on the discussion page for this template.
- An expression error may also occur when any coordinate parameter has a value, but one or more coordinate parameters are blank or invalid.
Basic blank template, ready to cut and paste. See the next section for a copy of the template with all parameters and comments. See the table below that for a full description of each parameter.
Using metric units
编辑{{Infobox settlement | name = | native_name = | native_name_lang = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead --> | settlement_type = | image_skyline = | image_alt = | image_caption = | image_flag = | flag_alt = | image_seal = | seal_alt = | image_shield = | shield_alt = | etymology = | nickname = | motto = | image_map = | map_alt = | map_caption = | pushpin_map = | pushpin_label_position = | pushpin_map_alt = | pushpin_map_caption = | coordinates = <!-- {{Coord}} --> | coor_pinpoint = | coordinates_type = | coordinates_footnotes = | coordinates_region = | subdivision_type = Country | subdivision_name = | subdivision_type1 = | subdivision_name1 = | subdivision_type2 = | subdivision_name2 = | subdivision_type3 = | subdivision_name3 = | established_title = | established_date = | founder = | seat_type = | seat = | government_footnotes = | leader_party = | leader_title = | leader_name = | unit_pref = Metric <!-- ALL fields with measurements have automatic unit conversion --> <!-- for references: use <ref> tags --> | area_footnotes = | area_urban_footnotes = <!-- <ref> </ref> --> | area_rural_footnotes = <!-- <ref> </ref> --> | area_metro_footnotes = <!-- <ref> </ref> --> | area_magnitude = <!-- <ref> </ref> --> | area_note = | area_water_percent = | area_rank = | area_blank1_title = | area_blank2_title = <!-- square kilometers --> | area_total_km2 = | area_land_km2 = | area_water_km2 = | area_urban_km2 = | area_rural_km2 = | area_metro_km2 = | area_blank1_km2 = | area_blank2_km2 = <!-- hectares --> | area_total_ha = | area_land_ha = | area_water_ha = | area_urban_ha = | area_rural_ha = | area_metro_ha = | area_blank1_ha = | area_blank2_ha = | length_km = | width_km = | dimensions_footnotes = | elevation_footnotes = | elevation_m = | population_as_of = | population_footnotes = | population_total = | population_density_km2 = auto | population_note = | population_demonym = | timezone1 = | utc_offset1 = | timezone1_DST = | utc_offset1_DST = | postal_code_type = | postal_code = | area_code_type = | area_code = | iso_code = | website = <!-- {{URL|example.com}} --> | footnotes = }}
Using non-metric units
编辑{{Infobox settlement | name = | native_name = | native_name_lang = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead --> | settlement_type = | image_skyline = | image_alt = | image_caption = | image_flag = | flag_alt = | image_seal = | seal_alt = | image_shield = | shield_alt = | etymology = | nickname = | motto = | image_map = | map_alt = | map_caption = | pushpin_map = | pushpin_label_position = | pushpin_map_alt = | pushpin_map_caption = | coordinates = <!-- {{Coord}} --> | coor_pinpoint = | coordinates_type = | coordinates_footnotes = | coordinates_region = | subdivision_type = Country | subdivision_name = | subdivision_type1 = | subdivision_name1 = | subdivision_type2 = | subdivision_name2 = | subdivision_type3 = | subdivision_name3 = | established_title = | established_date = | founder = | seat_type = | seat = | government_footnotes = | leader_party = | leader_title = | leader_name = | unit_pref = US<!-- or UK --> <!-- ALL fields with measurements have automatic unit conversion --> <!-- for references: use <ref> tags --> | area_footnotes = | area_urban_footnotes = <!-- <ref> </ref> --> | area_rural_footnotes = <!-- <ref> </ref> --> | area_metro_footnotes = <!-- <ref> </ref> --> | area_magnitude = <!-- use only to set a special wikilink --> | area_note = | area_water_percent = | area_rank = | area_blank1_title = | area_blank2_title = <!-- square miles --> | area_total_sq_mi = | area_land_sq_mi = | area_water_sq_mi = | area_urban_sq_mi = | area_rural_sq_mi = | area_metro_sq_mi = | area_blank1_sq_mi = | area_blank2_sq_mi = <!-- acres --> | area_total_acre = | area_land_acre = | area_water_acre = | area_urban_acre = | area_rural_acre = | area_metro_acre = | area_blank1_acre = | area_blank2_acre = | length_mi = | width_mi = | dimensions_footnotes = | elevation_footnotes = | elevation_ft = | population_as_of = | population_footnotes = | population_total = | population_density_sq_mi= auto | population_note = | population_demonym = | timezone1 = | utc_offset1 = | timezone1_DST = | utc_offset1_DST = | postal_code_type = | postal_code = | area_code_type = | area_code = | iso_code = | website = <!-- {{URL|example.com}} --> | footnotes = }}
Short version
编辑{{Infobox settlement | name = | native_name = | native_name_lang = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead --> | settlement_type = | image_skyline = | image_alt = | image_caption = | etymology = | nickname = | coordinates = <!-- {{Coord}} --> | coordinates_type = | coordinates_region = | subdivision_type = Country | subdivision_name = | subdivision_type1 = | subdivision_name1 = | subdivision_type2 = | subdivision_name2 = | website = <!-- {{URL|example.com}} --> }}
Complete empty syntax, with comments
编辑This copy of the template lists all parameters except for some of the repeating numbered parameters which are noted in the comments. Comments here should be brief; see the table below for full descriptions of each parameter.
{{Infobox settlement | name = <!-- at least one of the first two fields must be filled in --> | official_name = | native_name = <!-- if different from the English name --> | native_name_lang = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead --> | other_name = | settlement_type = <!-- such as Town, Village, City, Borough etc. --> <!-- transliteration(s) --> | translit_lang1 = | translit_lang1_type = | translit_lang1_info = | translit_lang1_type1 = | translit_lang1_info1 = | translit_lang1_type2 = | translit_lang1_info2 = <!-- etc., up to translit_lang1_type6 / translit_lang1_info6 --> | translit_lang2 = | translit_lang2_type = | translit_lang2_info = | translit_lang2_type1 = | translit_lang2_info1 = | translit_lang2_type2 = | translit_lang2_info2 = <!-- etc., up to translit_lang2_type6 / translit_lang2_info6 --> <!-- images, nickname, motto --> | image_skyline = | imagesize = | image_alt = | image_caption = | image_flag = | flag_size = | flag_alt = | flag_border = | flag_link = | image_seal = | seal_size = | seal_alt = | seal_link = | seal_type = | image_shield = | shield_size = | shield_alt = | shield_link = | image_blank_emblem = | blank_emblem_type = <!-- defaults to Logo --> | blank_emblem_size = | blank_emblem_alt = | blank_emblem_link = | etymology = | nickname = | motto = | anthem = <!-- maps and coordinates --> | image_map = | mapsize = | map_alt = | map_caption = | image_map1 = | mapsize1 = | map_alt1 = | map_caption1 = | pushpin_map = <!-- name of a location map as per Template:Location_map --> | pushpin_label_position = <!-- position of the pushpin label: left, right, top, bottom, none --> | pushpin_label = <!-- only necessary if "name" or "official_name" are too long --> | pushpin_map_alt = | pushpin_mapsize = | pushpin_relief = | pushpin_map_caption = | coordinates = <!-- {{Coord}} --> | coor_pinpoint = <!-- to specify exact location of coordinates (was coor_type) --> | coordinates_region = <!-- ISO 3166-1 alpha-2 or ISO 3166-2 code for country/region containing the coordinates --> | coordinates_type = <!-- parameter list passed to Coord template, overrides coordinates_region --> | coordinates_wikidata = yes | coordinates_footnotes = <!-- for references: use <ref> tags --> | grid_name = <!-- name of a regional grid system --> | grid_position = <!-- position on the regional grid system --> <!-- location --> | subdivision_type = Country | subdivision_name = <!-- the name of the country --> | subdivision_type1 = | subdivision_name1 = | subdivision_type2 = | subdivision_name2 = <!-- etc., subdivision_type6 / subdivision_name6 --> <!-- established --> | established_title = <!-- Founded --> | established_date = | established_title1 = <!-- Incorporated (town) --> | established_date1 = | established_title2 = <!-- Incorporated (city) --> | established_date2 = | established_title3 = | established_date3 = | established_title4 = | established_date4 = | established_title5 = | established_date5 = | established_title6 = | established_date6 = | established_title7 = | established_date7 = | extinct_title = | extinct_date = | founder = | named_for = <!-- seat, smaller parts --> | seat_type = <!-- defaults to: Seat --> | seat = | seat1_type = <!-- defaults to: Former seat --> | seat1 = | parts_type = <!-- defaults to: Boroughs --> | parts_style = <!-- list, coll (collapsed list), para (paragraph format) --> | parts = <!-- parts text, or header for parts list --> | p1 = | p2 = <!-- etc., up to p50: for separate parts to be listed--> <!-- government type, leaders --> | government_footnotes = <!-- for references: use <ref> tags --> | government_type = | governing_body = | leader_party = | leader_title = | leader_name = <!-- add (no-break space) to disable automatic links --> | leader_title1 = | leader_name1 = <!-- etc., up to leader_title4 / leader_name4 --> <!-- display settings --> | total_type = <!-- to set a non-standard label for total area and population rows --> | unit_pref = <!-- enter: Imperial, to display imperial before metric --> <!-- area --> | area_footnotes = <!-- for references: use <ref> tags --> | area_magnitude = <!-- use only to set a special wikilink --> | dunam_link = <!-- If dunams are used, this specifies which dunam to link. --> | area_total_km2 = <!-- ALL fields with measurements have automatic unit conversion --> | area_total_sq_mi = <!-- see table @ Template:Infobox settlement for details --> | area_total_ha = | area_total_acre = | area_total_dunam = <!-- used in Middle East articles only --> | area_land_km2 = | area_land_sq_mi = | area_land_ha = | area_land_acre = | area_land_dunam = <!-- used in Middle East articles only --> | area_water_km2 = | area_water_sq_mi = | area_water_ha = | area_water_acre = | area_water_dunam = <!-- used in Middle East articles only --> | area_water_percent = | area_urban_footnotes = <!-- for references: use <ref> tags --> | area_urban_km2 = | area_urban_sq_mi = | area_urban_ha = | area_urban_acre = | area_urban_dunam = <!-- used in Middle East articles only --> | area_rural_footnotes = <!-- for references: use <ref> tags --> | area_rural_km2 = | area_rural_sq_mi = | area_rural_ha = | area_rural_acre = | area_rural_dunam = <!-- used in Middle East articles only --> | area_metro_footnotes = <!-- for references: use <ref> tags --> | area_metro_km2 = | area_metro_sq_mi = | area_metro_ha = | area_metro_acre = | area_metro_dunam = <!-- used in Middle East articles only --> | area_rank = | area_blank1_title = | area_blank1_km2 = | area_blank1_sq_mi = | area_blank1_ha = | area_blank1_acre = | area_blank1_dunam = <!-- used in Middle East articles only --> | area_blank2_title = | area_blank2_km2 = | area_blank2_sq_mi = | area_blank2_ha = | area_blank2_acre = | area_blank2_dunam = <!-- used in Middle East articles only --> | area_note = <!-- dimensions --> | dimensions_footnotes = <!-- for references: use <ref> tags --> | length_km = | length_mi = | width_km = | width_mi = <!-- elevation --> | elevation_footnotes = <!-- for references: use <ref> tags --> | elevation_m = | elevation_ft = | elevation_point = <!-- for denoting the measurement point --> | elevation_max_footnotes = <!-- for references: use <ref> tags --> | elevation_max_m = | elevation_max_ft = | elevation_max_point = <!-- for denoting the measurement point --> | elevation_max_rank = | elevation_min_footnotes = <!-- for references: use <ref> tags --> | elevation_min_m = | elevation_min_ft = | elevation_min_point = <!-- for denoting the measurement point --> | elevation_min_rank = <!-- population --> | population_as_of = | population_footnotes = <!-- for references: use <ref> tags --> | population_total = | pop_est_as_of = | pop_est_footnotes = | population_est = | population_rank = | population_density_km2 = <!-- for automatic calculation of any density field, use: auto --> | population_density_sq_mi= | population_urban_footnotes = | population_urban = | population_density_urban_km2 = | population_density_urban_sq_mi = | population_rural_footnotes = | population_rural = | population_density_rural_km2 = | population_density_rural_sq_mi = | population_metro_footnotes = | population_metro = | population_density_metro_km2 = | population_density_metro_sq_mi = | population_density = | population_density_rank = | population_blank1_title = | population_blank1 = | population_density_blank1_km2 = | population_density_blank1_sq_mi= | population_blank2_title = | population_blank2 = | population_density_blank2_km2 = | population_density_blank2_sq_mi= | population_demonym = <!-- demonym, e.g. Liverpudlian for someone from Liverpool --> | population_note = <!-- demographics (section 1) --> | demographics_type1 = | demographics1_footnotes = <!-- for references: use <ref> tags --> | demographics1_title1 = | demographics1_info1 = <!-- etc., up to demographics1_title5 / demographics1_info5 --> <!-- demographics (section 2) --> | demographics_type2 = | demographics2_footnotes = <!-- for references: use <ref> tags --> | demographics2_title1 = | demographics2_info1 = <!-- etc., up to demographics2_title5 / demographics2_info5 --> <!-- time zone(s) --> | timezone1 = | utc_offset1 = | timezone1_DST = | utc_offset1_DST = | timezone2 = | utc_offset2 = | timezone2_DST = | utc_offset2_DST = <!-- postal codes, area code --> | postal_code_type = <!-- enter ZIP code, Postcode, Post code, Postal code... --> | postal_code = | postal2_code_type = <!-- enter ZIP code, Postcode, Post code, Postal code... --> | postal2_code = | area_code_type = <!-- defaults to: Area code(s) --> | area_code = | geocode = | iso_code = | registration_plate_type = | registration_plate = <!-- blank fields (section 1) --> | blank_name_sec1 = | blank_info_sec1 = | blank1_name_sec1 = | blank1_info_sec1 = | blank2_name_sec1 = | blank2_info_sec1 = <!-- etc., up to blank7_name_sec1 / blank7_info_sec1 --> <!-- blank fields (section 2) --> | blank_name_sec2 = | blank_info_sec2 = | blank1_name_sec2 = | blank1_info_sec2 = | blank2_name_sec2 = | blank2_info_sec2 = <!-- etc., up to blank7_name_sec2 / blank7_info_sec2 --> <!-- website, footnotes --> | website = <!-- {{URL|example.com}} --> | footnotes = }}
Parameter names and descriptions
编辑
Name and transliteration编辑 | ||
Parameter name | Usage | Description |
---|---|---|
name | optional | This is the usual name in English. If it's not specified, the infobox will use the official_name as a title unless this too is missing, in which case the page name will be used. |
official_name | optional | The official name in English if different from name |
native_name | optional | Name in the local language, if different from name, and if not English. This will display under the name/official name |
native_name_lang | optional | Use ISO 639-2 code, e.g. "fr" for French. If there is more than one native name, in different languages, enter those names using {{lang}}, instead. |
other_name | optional | For places with a former or more common name like Bombay or Saigon |
settlement_type | optional | Any type can be entered, such as City, Town, Village, Hamlet, Municipality, Reservation, etc. If set, will be displayed under the names, provided that either name or official_name is filled in. Might also be used as a label for total population/area (defaulting to City), if needed to distinguish from Urban, Rural or Metro (if urban, rural or metro figures are not present, the label is Total unless total_type is set). |
Transliteration(s) | ||
translit_lang1 | optional | Will place the "entry" before the word "transliteration(s)". Can be used to specify a particular language like in Dêlêg or one may just enter "Other", like in Gaza's article. |
translit_lang1_type translit_lang1_type1 to translit_lang1_type6 |
optional | |
translit_lang1_info translit_lang1_info1 to translit_lang1_info6 |
optional | |
translit_lang2 | optional | Will place a second transliteration. See Dêlêg |
translit_lang2_type translit_lang2_type1 to translit_lang2_type6 |
optional | |
translit_lang2_info translit_lang2_info1 to translit_lang2_info6 |
optional | |
Images, nickname, motto编辑 | ||
Parameter name | Usage | Description |
Skyline image | ||
image_skyline | optional | Despite the name it can be any image that an editor wishes. |
imagesize | optional | Can be used to tweak the size of the image_skyline up or down. This can be helpful if an editor wants to make the infobox wider. If used, px must be specified; default size is 250px. |
image_alt | optional | Alt text for the image, used by visually impaired readers who cannot see the image. See WP:ALT. |
image_caption | optional | Will place a caption under the image_skyline (if present) |
Flag image | ||
image_flag | optional | Used for a flag. |
flag_size | optional | Can be used to tweak the size of the image_flag up or down from 100px as desired. If used, px must be specified; default size is 100px. |
flag_alt | optional | Alt text for the flag. |
flag_border | optional | Set to 'no' to remove the border from the flag |
flag_link | optional | |
Seal image | ||
image_seal | optional | If the place has an official seal. |
seal_size | optional | If used, px must be specified; default size is 100px. |
seal_alt | optional | Alt text for the seal. |
seal_link seal_type |
optional | |
Coat of arms image | ||
image_shield | optional | Can be used for a place with a coat of arms. |
shield_size | optional | If used, px must be specified; default size is 100px. |
shield_alt | optional | Alt text for the shield. |
shield_link | optional | Can be used if a wiki article if known but is not automatically linked by the template. See Coquitlam, British Columbia's infobox for an example. |
Logo or emblem image | ||
image_blank_emblem | optional | Can be used if a place has an official logo, crest, emblem, etc. Logo is the default type. See Kingston upon Hull's infobox for an example. |
blank_emblem_type | optional | To specify what type of emblem "image_blank_emblem" is. The default is Logo. |
blank_emblem_size | optional | If used, px must be specified; default size is 100px. |
blank_emblem_alt | optional | Alt text for blank emblem. |
blank_emblem_link | optional | |
Nickname, motto | ||
etymology | optional | origin of name |
nickname | optional | well-known nickname(s) |
motto | optional | Will place the motto under the nicknames |
anthem | optional | Will place the anthem (song) under the nicknames |
Maps, coordinates编辑 | ||
Parameter name | Usage | Description |
Map images | ||
image_map | optional | |
mapsize | optional | If used, px must be specified; default is 250px. |
map_alt | optional | Alt text for map. |
map_caption | optional | |
image_map1 | optional | A secondary map image. The field image_map must be filled in first. Example see: Bloomsburg, Pennsylvania. |
mapsize1 | optional | If used, px must be specified; default is 250px. |
map_alt1 | optional | Alt text for secondary map. |
map_caption1 | optional | |
Pushpin map(s), coordinates | ||
pushpin_map | optional | The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinate fields (from |coordinates= ) position a pushpin coordinate marker and label on the map automatically. Example: Padang, Indonesia. To show multiple pushpin maps, provide a list of maps separated by #, e.g., California#USA
|
pushpin_label_position | optional | The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is right. |
pushpin_map_alt | optional | Alt text for pushpin map. |
pushpin_mapsize | optional | Must be entered as only a number—do not use px. The default value is 250. |
pushpin_map_caption | optional | Fill out if a different caption from map_caption is desired. |
pushpin_relief | optional | Set this to y or any non-blank value to use an alternative relief map provided by the selected location map (if a relief map is available).
|
pushpin_overlay | optional | Can be used to specify an image to be superimposed on the regular pushpin map. |
coordinates | optional | Latitude and longitude. Use {{Coord}}. See the documentation for {{Coord}} for more details on usage. |
coor_pinpoint | optional | If needed, to specify more exactly where (or what) coordinates are given (e.g. Town Hall) or a specific place in a larger area (e.g. a city in a county). Example: Masovian Voivodeship |
coordinates_region | optional | Can be used to override the default region: for the coordinates. Use either a two character ISO 3166-1二位字母代码 country code or an ISO 3166-2 region code. If coordinates_region is omitted or blank, region: will be set according to subdivision_name, using {{Country abbreviation}}. For example, subdivision_name = United Kingdom will generate coordinates with "region:GB". In addition, wherever possible, subdivision_name1 will be used to determine the region. For example: subdivision_name=Canada and subdivision_name1=Ontario will yield "region:CA-ON". |
coordinates_type | optional | Can be used to override the default coordinate parameters for the coordinates. May include type:, scale:, dim:, region:, and/or source:, joined by underscores ("_"). If
|
coordinates_footnotes | optional | Reference(s) for coordinates, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}} |
coordinates_wikidata | optional | If the parameter is set to any non-blank value, and the |coordinates= parameter is blank/omitted, and the coordinates are on the corresponding wikidata page, then the coordinates will be pulled from wikidata.
|
grid_name grid_position |
optional | Name of a regional grid system and position on the regional grid |
Location, established, seat, subdivisions, government, leaders编辑 | ||
Parameter name | Usage | Description |
Location | ||
subdivision_type | optional | almost always Country
|
subdivision_name | optional | Depends on the subdivision_type—use the name in text form, sample: United States or United States , flag icons or flag templates can be used in this field.
|
subdivision_type1 to subdivision_type6 |
optional | Can be State/Province, region, county. |
subdivision_name1 to subdivision_name6 |
optional | Use the name in text form, sample: Florida or [[Florida]] . Flag icons or flag templates can be used in this field per WP:MOSFLAG.
|
Established | ||
established_title | optional | Example: Founded |
established_date | optional | |
established_title1 | optional | Example: Incorporated (town) [Note that "established_title1" is distinct from "established_title"; you can think of "established_title" as behaving like "established_title0".] |
established_date1 | optional | [See note for "established_title1".] |
established_title2 | optional | Example: Incorporated (city) |
established_date2 | optional | |
established_title3 | optional | |
established_date3 | optional | |
established_title4 | optional | |
established_date4 | optional | |
established_title5 | optional | |
established_date5 | optional | |
established_title6 | optional | |
established_date6 | optional | |
established_title7 | optional | |
established_date7 | optional | |
extinct_title | optional | For when a settlement ceases to exist |
extinct_date | optional | |
founder | optional | Who the settlement was founded by |
named_for | optional | The source of the name of the settlement (a person, a place, et cetera) |
Seat of government | ||
seat_type | optional | The label for the seat of government (defaults to Seat). |
seat | optional | The seat of government. |
Smaller parts (e.g. boroughs of a city) | ||
parts_type | optional | The label for the smaller subdivisions (defaults to Boroughs). |
parts_style | optional | Set to list to display as a collapsible list, coll as a collapsed list, or para to use paragraph style. Default is list for up to 5 items, otherwise coll. |
parts | optional | Text or header of the list of smaller subdivisions. |
p1 p2 to p50 |
optional | The smaller subdivisions to be listed. Example: Warsaw |
Government type, leaders | ||
government_footnotes | optional | Reference(s) for government, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}} |
government_type | optional | Example: Mayor-council government |
governing_body | optional | Name of the place's governing body |
leader_party | optional | Political party of the place's leader |
leader_title | optional | First title of the place's leader, e.g. Mayor |
leader_name | optional | Name of the place's leader |
leader_title1 to leader_title4 |
optional | |
leader_name1 to leader_name4 |
optional | For long lists use {{Collapsible list}}. See Halifax for an example. |
Geographic information编辑 | ||
These fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they should enter both values in their respective fields. | ||
Parameter name | Usage | Description |
Display settings | ||
total_type | optional | Specifies what "total" area and population figure refer to, e.g. Greater London. This overrides other labels for total population/area. To make the total area and population display on the same line as the words "Area" and "Population", with no "Total" or similar label, set the value of this parameter to . |
unit_pref | optional | To change the unit order to imperial (metric), enter imperial. The default display style is metric (imperial). However, the template will swap the order automatically if the subdivision_name equals some variation of the USA or the UK. For the middle east, a unit preference of dunam can be entered (only affects total area). All values must be entered in a raw format: no commas, spaces, or unit symbols. The template will format them automatically. |
Area | ||
area_footnotes | optional | Reference(s) for area, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}} |
area_magnitude | optional | Setting this to any non-empty value will create a link to the appropriate order of magnitude of area page (e.g. 1 E+6 m²). |
dunam_link | optional | If dunams are used, the default is to link the word dunams in the total area section. This can be changed by setting dunam_link to another measure (e.g. dunam_link=water ). Linking can also be turned off by setting the parameter to something else (e.g. dunam_link=none or dunam_link=off ).
|
area_total_km2 | optional | Total area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_total_sq_mi is empty. |
area_total_ha | optional | Total area in hectares—symbol: ha. Value must be entered in raw format, no commas or spaces. Auto-converted to display acres if area_total_acre is empty. |
area_total_sq_mi | optional | Total area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_total_km2 is empty. |
area_total_acre | optional | Total area in acres. Value must be entered in raw format, no commas or spaces. Auto-converted to display hectares if area_total_ha is empty. |
area_total_dunam | optional | Total area in dunams, which is wiki-linked. Used in middle eastern places like Israel, Gaza, and the West Bank. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers or hectares and square miles or acreds if area_total_km2, area_total_ha, area_total_sq_mi, and area_total_acre are empty. Examples: Gaza and Ramallah |
area_land_km2 | optional | Land area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_land_sq_mi is empty. |
area_land_sq_mi | optional | Land area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_land_km2 is empty. |
area_land_ha | optional | similar to area_total_ha
|
area_land_dunam | optional | similar to area_total_dunam
|
area_land_acre | optional | similar to area_total_acre
|
area_water_km2 | optional | Water area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_water_sq_mi is empty. |
area_water_sq_mi | optional | Water area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_water_km2 is empty. |
area_water_ha | optional | similar to area_total_ha
|
area_water_dunam | optional | similar to area_total_dunam
|
area_water_acre | optional | similar to area_total_acre
|
area_water_percent | optional | percent of water without the "%" |
area_urban_km2 | optional | |
area_urban_sq_mi | optional | |
area_urban_ha | optional | similar to area_total_ha
|
area_urban_dunam | optional | similar to area_total_dunam
|
area_urban_acre | optional | similar to area_total_acre
|
area_rural_km2 | optional | |
area_rural_sq_mi | optional | |
area_rural_ha | optional | similar to area_total_ha
|
area_rural_dunam | optional | similar to area_total_dunam
|
area_rural_acre | optional | similar to area_total_acre
|
area_metro_km2 | optional | |
area_metro_sq_mi | optional | |
area_metro_ha | optional | similar to area_total_ha
|
area_metro_dunam | optional | similar to area_total_dunam
|
area_metro_acre | optional | similar to area_total_acre
|
area_rank | optional | The settlement's area, as ranked within its parent sub-division |
area_blank1_title | optional | Example see London |
area_blank1_km2 | optional | |
area_blank1_sq_mi | optional | |
area_blank1_ha | optional | similar to area_total_ha
|
area_blank1_dunam | optional | similar to area_total_dunam
|
area_blank1_acre | optional | similar to area_total_acre
|
area_blank2_title | optional | |
area_blank2_km2 | optional | |
area_blank2_sq_mi | optional | |
area_blank2_ha | optional | similar to area_total_ha
|
area_blank2_dunam | optional | similar to area_total_dunam
|
area_blank2_acre | optional | similar to area_total_acre
|
area_note | optional | A place for additional information such as the name of the source. |
Dimensions | ||
dimensions_footnotes | optional | Reference(s) for dimensions, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}} |
length_km | optional | Raw number entered in kilometers. Will automatically convert to display length in miles if length_mi is empty. |
length_mi | optional | Raw number entered in miles. Will automatically convert to display length in kilometers if length_km is empty. |
width_km | optional | Raw number entered in kilometers. Will automatically convert to display width in miles if length_mi is empty. |
width_mi | optional | Raw number entered in miles. Will automatically convert to display width in kilometers if length_km is empty. |
Elevation | ||
elevation_footnotes | optional | Reference(s) for elevation, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}} |
elevation_m | optional | Raw number entered in meters. Will automatically convert to display elevation in feet if elevation_ft is empty. However, if a range in elevation (i.e. 5–50 m ) is desired, use the "max" and "min" fields below |
elevation_ft | optional | Raw number, entered in feet. Will automatically convert to display the average elevation in meters if elevation_m field is empty. However, if a range in elevation (e.g. 50–500 ft ) is desired, use the "max" and "min" fields below |
elevation_max_footnotes elevation_min_footnotes |
optional | Same as above, but for the "max" and "min" elevations. See Leeds. |
elevation_max_m elevation_max_ft elevation_max_rank elevation_min_m elevation_min_ft elevation_min_rank |
optional | Used to give highest & lowest elevations and rank, instead of just a single value. Example: Halifax Regional Municipality. |
Population, demographics编辑 | ||
The density fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they can enter both values in their respective fields. To calculate density with respect to the total area automatically, type auto in place of any density value. | ||
Parameter name | Usage | Description |
Population | ||
population_total | optional | Actual population (see below for estimates) preferably consisting of digits only (without any commas) |
population_as_of | optional | The year for the population total (usually a census year) |
population_footnotes | optional | Reference(s) for population, placed within <ref> </ref> tags |
population_density_km2 | optional | |
population_density_sq_mi | optional | |
population_est | optional | Population estimate. |
pop_est_as_of | optional | The year or month & year of the population estimate |
pop_est_footnotes | optional | Reference(s) for population estimate, placed within <ref> </ref> tags |
population_urban | optional | |
population_urban_footnotes | optional | Reference(s) for urban population, placed within <ref> </ref> tags |
population_density_urban_km2 | optional | |
population_density_urban_sq_mi | optional | |
population_rural | optional | |
population_rural_footnotes | optional | Reference(s) for rural population, placed within <ref> </ref> tags |
population_density_rural_km2 | optional | |
population_density_rural_sq_mi | optional | |
population_metro | optional | |
population_metro_footnotes | optional | Reference(s) for metro population, placed within <ref> </ref> tags |
population_density_metro_km2 | optional | |
population_density_metro_sq_mi | optional | |
population_rank | optional | The settlement's population, as ranked within its parent sub-division |
population_density_rank | optional | The settlement's population density, as ranked within its parent sub-division |
population_blank1_title | optional | Can be used for estimates. Example: Windsor, Ontario |
population_blank1 | optional | The population value for blank1_title |
population_density_blank1_km2 | optional | |
population_density_blank1_sq_mi | optional | |
population_blank2_title | optional | |
population_blank2 | optional | |
population_density_blank2_km2 | optional | |
population_density_blank2_sq_mi | optional | |
population_demonym | optional | A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example, a citizen in Liverpool is known as a Liverpudlian. |
population_note | optional | A place for additional information such as the name of the source. See Windsor, Ontario for example. |
Demographics (section 1) | ||
demographics_type1 | optional | Section Header. For example: Ethnicity |
demographics1_footnotes | optional | Reference(s) for demographics section 1, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}} |
demographics1_title1 to demographics1_title5 |
optional | Titles related to demographics_type1. For example: White, Black, Hispanic... |
demographics1_info1 to demographics1_info5 |
optional | Information related to the "titles". For example: 50%, 25%, 10%... |
Demographics (section 2) | ||
demographics_type2 | optional | A second section header. For example: Languages |
demographics2_footnotes | optional | Reference(s) for demographics section 2, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}} |
demographics2_title1 to demographics2_title5 |
optional | Titles related to demographics_type2. For example: English, French, Arabic... |
demographics2_info1 to demographics2_info5 |
optional | Information related to the "titles" for type2. For example: 50%, 25%, 10%... |
Other information编辑 | ||
Parameter name | Usage | Description |
Time zone(s) | ||
timezone1 | optional | |
utc_offset1 | optional | |
timezone1_DST | optional | |
utc_offset1_DST | optional | |
timezone2 | optional | A second timezone field for larger areas such as a Province. |
utc_offset2 | optional | |
timezone2_DST | optional | |
utc_offset2_DST | optional | |
Postal code(s) & area code | ||
postal_code_type | optional | |
postal_code | optional | |
postal2_code_type | optional | |
postal2_code | optional | |
area_code_type | optional | If left blank/not used template will default to "Area code(s)" |
area_code | optional | |
geocode | optional | See Geocode |
iso_code | optional | See ISO 3166 |
registration_plate_type | optional | If left blank/not used template will default to "Vehicle registration" |
registration_plate | optional | See Vehicle registration plate |
Blank fields (section 1) | ||
blank_name_sec1 | optional | Fields used to display other information. The name is displayed in bold on the left side of the infobox. |
blank_info_sec1 | optional | The information associated with the blank_name heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see: Warsaw |
blank1_name_sec1 to blank7_name_sec1 |
optional | Up to 7 additional fields (8 total) can be displayed in this section |
blank1_info_sec1 to blank7_info_sec1 |
optional | |
Blank fields (section 2) | ||
blank_name_sec2 | optional | For a second section of blank fields |
blank_info_sec2 | optional | Example: Beijing |
blank1_name_sec2 to blank7_name_sec2 |
optional | Up to 7 additional fields (8 total) can be displayed in this section |
blank1_info_sec2 to blank7_info_sec2 |
optional | |
Website, footnotes | ||
website | optional | External link to official website, Use {{URL}}, thus: {{URL|example.com}} |
footnotes | optional | Text to be displayed at the bottom of the infobox |
Examples
编辑- Example 1
Chicago | |
---|---|
City | |
Clockwise from top: Downtown Chicago, the Chicago Theatre, the Chicago 'L', Navy Pier, Millennium Park, the Field Museum, and the Willis (formerly Sears) Tower | |
词源:Template:Lang-mia ("wild onion" or "wild garlic") | |
绰号:The Windy City, The Second City, Chi-Town, Chi-City, Hog Butcher for the World, City of the Big Shoulders, The City That Works, and others found at List of nicknames for Chicago | |
格言:拉丁语:Urbs in Horto (City in a Garden), Make Big Plans (Make No Small Plans), I Will | |
Location in the Chicago metropolitan area and Illinois | |
坐标:41°50′15″N 87°40′55″W / 41.83750°N 87.68194°W[1] | |
Country | United States |
State | Illinois |
Counties | Cook, DuPage |
Settled | 1770s |
Incorporated | March 4, 1837 |
语源 | Template:Lang-mia ("Wild onion") |
政府 | |
• 类型 | Mayor–council |
• Mayor | Rahm Emanuel (D) |
• Council | Chicago City Council |
面积[1] | |
• City | 234.114 平方英里 (600 平方公里) |
• 陆地 | 227.635 平方英里(600 平方公里) |
• 水域 | 6.479 平方英里(20 平方公里) 3% |
• 市区 | 2,123 平方英里(5,000 平方公里) |
• 都会区 | 10,874 平方英里(30,000 平方公里) |
海拔[2] | 594 英尺(181 米) |
人口(2010)[3][4] | |
• City | 2,695,598人 |
• 估计(2011) | 2,707,120 |
• 排名 | 3rd US |
• 密度 | 11,892.4人/平方英里(4,591.7人/平方公里) |
• 市区 | 8,711,000 |
• 市区密度 | 4,103人/平方英里(表达式错误:无法识别标点符号“”。人/平方公里) |
• 都会区 | 9,461,105 |
• 都会区密度 | 870人/平方英里(336人/平方公里) |
居民称谓 | Chicagoan |
时区 | CST(UTC−06:00) |
• 夏时制 | CDT(UTC−05:00) |
Area codes | 312, 773, 872 |
FIPS code | 17-14000 |
GNIS feature ID | 423587, 428803 |
网站 | www |
[2] |
<!-- NOTE: This differs from the actual Chicago infobox in order to provide examples. -->
{{Infobox settlement
| name = Chicago
| settlement_type = [[City (Illinois)|City]]
| image_skyline = Chicago montage.jpg
| imagesize = 275px <!--default is 250px-->
| image_caption = Clockwise from top: [[Downtown Chicago]], the [[Chicago Theatre]], the [[Chicago 'L']], [[Navy Pier]], [[Millennium Park]], the [[Field Museum]], and the [[Willis Tower|Willis (formerly Sears) Tower]]
| image_flag = Flag of Chicago, Illinois.svg
| image_seal = Seal of Chicago, Illinois.svg
| etymology = {{lang-mia|shikaakwa}} ("wild onion" or "wild garlic")
| nickname = [[Origin of Chicago's "Windy City" nickname|The Windy City]], The Second City, Chi-Town, Chi-City, Hog Butcher for the World, City of the Big Shoulders, The City That Works, and others found at [[List of nicknames for Chicago]]
| motto = {{lang-la|Urbs in Horto}} (''City in a Garden''), Make Big Plans (Make No Small Plans), I Will
| image_map = US-IL-Chicago.png
| map_caption = Location in the [[Chicago metropolitan area]] and Illinois
| pushpin_map = USA
| pushpin_map_caption = Location in the United States
| coordinates = {{coord|41|50|15|N|87|40|55|W}}
| coordinates_footnotes = <ref name="USCB Gazetteer 2010"/>
| subdivision_type = Country
| subdivision_name = United States
| subdivision_type1 = State
| subdivision_name1 = [[Illinois]]
| subdivision_type2 = [[List of counties in Illinois|Counties]]
| subdivision_name2 = [[Cook County, Illinois|Cook]], [[DuPage County, Illinois|DuPage]]
| established_title = Settled
| established_date = 1770s
| established_title2 = [[Municipal corporation|Incorporated]]
| established_date2 = March 4, 1837
| founder =
| named_for = {{lang-mia|shikaakwa}}<br /> ("Wild onion")
| government_type = [[Mayor–council government|Mayor–council]]
| leader_title = [[Mayor of Chicago|Mayor]]
| leader_name = [[Rahm Emanuel]]
| leader_party = [[Democratic Party (United States)|D]]
| leader_title1 = [[City council|Council]]
| leader_name1 = [[Chicago City Council]]
| unit_pref = Imperial
| area_footnotes = <ref name="USCB Gazetteer 2010">{{cite web | url = http://www.census.gov/geo/www/gazetteer/files/Gaz_places_national.txt | title = 2010 United States Census Gazetteer for Places: January 1, 2010 | format = text | work = 2010 United States Census | publisher = [[United States Census Bureau]] | date = April 2010 | accessdate = August 1, 2012}}</ref>
| area_magnitude = 1 E+8
| area_total_sq_mi = 234.114
| area_land_sq_mi = 227.635
| area_water_sq_mi = 6.479
| area_water_percent = 3
| area_urban_sq_mi = 2123
| area_metro_sq_mi = 10874
| elevation_footnotes = <ref name="GNIS"/>
| elevation_ft = 594
| elevation_m = 181
| population_as_of = [[2010 United States Census|2010]]
| population_footnotes = <ref name="USCB PopEstCities 2011">{{cite web | url = http://www.census.gov/popest/data/cities/totals/2011/tables/SUB-EST2011-01.csv | title = Annual Estimates of the Resident Population for Incorporated Places Over 50,000, Ranked by July 1, 2011 Population | format = [[comma-separated values|CSV]] | work = 2011 Population Estimates | publisher = [[United States Census Bureau]], Population Division | date = June 2012 | accessdate = August 1, 2012}}</ref><ref name="USCB Metro 2010">{{cite web | url=http://www.census.gov/prod/cen2010/briefs/c2010br-01.pdf | title = Population Change for the Ten Most Populous and Fastest Growing Metropolitan Statiscal Areas: 2000 to 2010 | date = March 2011 | publisher = [[U.S. Census Bureau]] | page = 6 |accessdate = April 12, 2011}}</ref>
| population_total = 2,695,598
| pop_est_as_of = 2011
| population_est = 2,707,120
| population_rank = [[List of United States cities by population|3rd US]]
| population_density_sq_mi = 11,892.4<!-- 2011 population_est / area_land_sq_mi -->
| population_urban = 8711000
| population_density_urban_sq_mi = auto
| population_metro = 9461105
| population_density_metro_sq_mi = auto
| population_demonym = Chicagoan
| timezone = [[Central Standard Time|CST]]
| utc_offset = −06:00
| timezone_DST = [[Central Daylight Time|CDT]]
| utc_offset_DST = −05:00
| area_code_type = [[North American Numbering Plan|Area codes]]
| area_code = [[Area code 312|312]], [[Area code 773|773]], [[Area code 872|872]]
| blank_name = [[Federal Information Processing Standards|FIPS]] code
| blank_info = {{FIPS|17|14000}}
| blank1_name = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info = {{GNIS4|423587}}, {{GNIS4|428803}}
| website = {{URL|www.cityofchicago.org}}
| footnotes = <ref name="GNIS">{{Cite GNIS|428803|City of Chicago|April 12, 2011}}</ref>
}}
- References
- ^ 1.0 1.1 2010 United States Census Gazetteer for Places: January 1, 2010 (text). 2010 United States Census. United States Census Bureau. April 2010 [August 1, 2012].
- ^ 2.0 2.1 City of Chicago. Geographic Names Information System. United States Geological Survey. [April 12, 2011].
- ^ Annual Estimates of the Resident Population for Incorporated Places Over 50,000, Ranked by July 1, 2011 Population (CSV). 2011 Population Estimates. United States Census Bureau, Population Division. June 2012 [August 1, 2012].
- ^ Population Change for the Ten Most Populous and Fastest Growing Metropolitan Statiscal Areas: 2000 to 2010 (PDF). U.S. Census Bureau: 6. March 2011 [April 12, 2011].
- Example 2
Detroit | |
---|---|
City | |
City of Detroit | |
Images from top to bottom, left to right: Downtown Detroit skyline, Spirit of Detroit, Greektown, Ambassador Bridge, Michigan Soldiers' and Sailors' Monument, Fox Theatre, and Comerica Park. | |
词源:法语:détroit (strait) | |
绰号:The Motor City, Motown, Renaissance City, The D, Hockeytown, The Automotive Capital of the World, Rock City, The 313 | |
格言:Speramus Meliora; Resurget Cineribus (Latin: We Hope For Better Things; It Shall Rise From the Ashes) | |
Location within Wayne County, Michigan and the state of Michigan | |
Location within the contiguous United States of America | |
坐标:42°19′53″N 83°2′45″W / 42.33139°N 83.04583°W | |
Country | 美国 |
State | 密歇根州 |
County | Wayne |
Founded | 1701 |
Incorporated | 1806 |
政府 | |
• 类型 | Mayor-Council |
• Mayor | Dave Bing (D) |
• City Council | Members
|
面积 | |
• City | 142.87 平方英里(370.03 平方公里) |
• 陆地 | 138.75 平方英里(359.36 平方公里) |
• 水域 | 4.12 平方英里(10.67 平方公里) |
• 市区 | 1,295 平方英里(3,000 平方公里) |
• 都会区 | 3,913 平方英里(10,000 平方公里) |
海拔 | 600 英尺(200 米) |
人口(2011) | |
• City | 706,585人 |
• 排名 | 18th in U.S. |
• 密度 | 5,142人/平方英里(1,985人/平方公里) |
• 市区 | 3,863,924 |
• 都会区 | 4,285,832 (US: 13th) |
• CSA | 5,207,434 (US: 11th) |
居民称谓 | Detroiter |
时区 | EST(UTC−5) |
• 夏时制 | EDT(UTC−4) |
电话区号 | 313 |
FIPS code | 26-22000 |
GNIS feature ID | 1617959, 1626181 |
网站 | DetroitMI.gov |
{{Infobox settlement
| name = Detroit
| settlement_type = [[City (Michigan)|City]]
| official_name = City of Detroit
| image_skyline = Detroit Montage.jpg
| imagesize = 290px
| image_caption = Images from top to bottom, left to right: [[Downtown Detroit]] skyline, [[Spirit of Detroit]], [[Greektown Historic District|Greektown]], [[Ambassador Bridge]], [[Michigan Soldiers' and Sailors' Monument]], [[Fox Theatre (Detroit)|Fox Theatre]], and [[Comerica Park]].
| image_flag = Flag of Detroit, Michigan.svg
| image_seal = Seal of Detroit, Michigan.svg
| etymology = {{lang-fr|détroit}} ([[strait]])
| nickname = The Motor City, Motown, Renaissance City, The D, Hockeytown, The Automotive Capital of the World, Rock City, The 313
| motto = ''Speramus Meliora; Resurget Cineribus''<br /><small>([[Latin]]: We Hope For Better Things; It Shall Rise From the Ashes)</small>
| image_map = Wayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg
| mapsize = 250x200px
| map_caption = Location within [[Wayne County, Michigan]] and the state of [[Michigan]]
| pushpin_map = USA
| pushpin_map_caption = Location within the [[Contiguous United States|contiguous United States of America]]
| coordinates = {{coord|42|19|53|N|83|2|45|W}}
| coordinates_footnotes =
| subdivision_type = Country
| subdivision_name = {{flagu|United States of America}}
| subdivision_type1 = State
| subdivision_name1 = {{flag|Michigan}}
| subdivision_type2 = [[List of counties in Michigan|County]]
| subdivision_name2 = [[Wayne County, Michigan|Wayne]]
| established_title = Founded
| established_date = 1701
| established_title2 = Incorporated
| established_date2 = 1806
| government_footnotes = <!-- for references: use<ref> tags -->
| government_type = [[Mayor-council government|Mayor-Council]]
| leader_title = [[List of mayors of Detroit, Michigan|Mayor]]
| leader_name = [[Dave Bing]]
| leader_party = [[Democratic Party (United States)|D]]
| leader_title1 = [[Detroit City Council|City Council]]
| leader_name1 = {{collapsible list|bullets=yes
| title = Members
| 1 = [[Charles Pugh]] – Council President
| 2 = [[Gary Brown (Detroit politician)|Gary Brown]] – Council President Pro-Tem
| 3 = [[JoAnn Watson]]
| 4 = [[Kenneth Cockrel, Jr.]]
| 5 = [[Saunteel Jenkins]]
| 6 = [[Andre Spivey]]
| 7 = [[James Tate (Detroit politician)|James Tate]]
| 8 = [[Brenda Jones (Detroit politician)|Brenda Jones]]
| 9 = [[Kwame Kenyatta]]
}}
| unit_pref = Imperial
| area_footnotes =
| area_magnitude =
| area_total_sq_mi = 142.87
| area_total_km2 = 370.03
| area_land_sq_mi = 138.75
| area_land_km2 = 359.36
| area_water_sq_mi = 4.12
| area_water_km2 = 10.67
| area_urban_sq_mi = 1295
| area_metro_sq_mi = 3913
| elevation_footnotes =
| elevation_ft = 600
| population_as_of = 2011
| population_footnotes =
| population_total = 706,585
| population_rank = [[List of United States cities by population|18th in U.S.]]
| population_urban = 3,863,924
| population_metro = 4,285,832 (US: [[List of United States metropolitan statistical areas|13th]])
| population_blank1_title = [[Combined statistical area|CSA]]
| population_blank1 = 5,207,434 (US: [[List of United States combined statistical areas|11th]])
| population_density_sq_mi= {{#expr:713777/138.8 round 0}}
| population_demonym = Detroiter
| population_note =
| timezone = [[Eastern Time Zone (North America)|EST]]
| utc_offset = −5
| timezone_DST = [[Eastern Daylight Time|EDT]]
| utc_offset_DST = −4
| postal_code_type =
| postal_code =
| area_code = [[Area code 313|313]]
| blank_name = [[Federal Information Processing Standards|FIPS code]]
| blank_info = {{FIPS|26|22000}}
| blank1_name = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info = {{GNIS4|1617959}}, {{GNIS4|1626181}}
| website = [http://www.detroitmi.gov/ DetroitMI.gov]
| footnotes =
}}
Redirects and calls
编辑At least 0 other templates call this one and many templates redirect here.
Supporting templates
编辑The following is a list of sub-templates used by Infobox settlement. See the current list of all sub-templates for documentation, sandboxes, testcases, etc.
- {{Infobox settlement/areadisp}}
- {{Infobox settlement/densdisp}}
- {{Infobox settlement/dunam}}
- {{Infobox settlement/dunam/mag}}
- {{Infobox settlement/impus}}
- {{Infobox settlement/impus/mag}}
- {{Infobox settlement/lengthdisp}}
- {{Infobox settlement/link}}
- {{Infobox settlement/metric}}
- {{Infobox settlement/metric/mag}}
- {{Infobox settlement/pref}}
Microformat
编辑本模板产生的HTML记号包含了HCard 微格式,能够让电脑解析地点名称和位置,具有可自动将文章分类至适当类别的功能。在HCard中有Geo微格式,能让电脑分析经纬度资料,因此可在地图上查询,或下载至全球定位系统(GPS)装置。关于微格式的更多使用资讯,请参阅维基百科的微格式专题。
hCard 使用以下的 HTML class:
adr
county-name
fn
label
locality
nickname
note
org
vcard
Geo由{{coord}}产生,并使用以下的HTML class:
geo
latitude
longtitude
请勿将这些class更名或删除。
当指定经纬度数值时,请避免太过详细。
TemplateData
编辑Tracking categories
编辑- Category:Settlement articles requiring maintenance(0)
- Category:Infobox settlement uses with imprecise region codes(0)
- Category:Pages using infobox settlement with a dot map(0)
- Category:Pages using infobox settlement with the image parameter(0)
- Category:Pages using infobox settlement with unknown parameters(0)