維基百科

用戶:Yinweichen/Testpage6

< User:Yinweichen

氯 17Cl
氫（非金屬） 氦（惰性氣體）
鋰（鹼金屬） 鈹（鹼土金屬） 硼（類金屬） 碳（非金屬） 氮（非金屬） 氧（非金屬） 氟（鹵素） 氖（惰性氣體）
鈉（鹼金屬） 鎂（鹼土金屬） 鋁（貧金屬） 矽（類金屬） 磷（非金屬） 硫（非金屬） 氯（鹵素） 氬（惰性氣體）
鉀（鹼金屬） 鈣（鹼土金屬） 鈧（過渡金屬） 鈦（過渡金屬） 釩（過渡金屬） 鉻（過渡金屬） 錳（過渡金屬） 鐵（過渡金屬） 鈷（過渡金屬） 鎳（過渡金屬） 銅（過渡金屬） 鋅（過渡金屬） 鎵（貧金屬） 鍺（類金屬） 砷（類金屬） 硒（非金屬） 溴（鹵素） 氪（惰性氣體）
銣（鹼金屬） 鍶（鹼土金屬） 釔（過渡金屬） 鋯（過渡金屬） 鈮（過渡金屬） 鉬（過渡金屬） 鎝（過渡金屬） 釕（過渡金屬） 銠（過渡金屬） 鈀（過渡金屬） 銀（過渡金屬） 鎘（過渡金屬） 銦（貧金屬） 錫（貧金屬） 銻（類金屬） 碲（類金屬） 碘（鹵素） 氙（惰性氣體）
銫（鹼金屬） 鋇（鹼土金屬） 鑭（鑭系元素） 鈰（鑭系元素） 鐠（鑭系元素） 釹（鑭系元素） 鉕（鑭系元素） 釤（鑭系元素） 銪（鑭系元素） 釓（鑭系元素） 鋱（鑭系元素） 鏑（鑭系元素） 鈥（鑭系元素） 鉺（鑭系元素） 銩（鑭系元素） 鐿（鑭系元素） 鎦（鑭系元素） 鉿（過渡金屬） 鉭（過渡金屬） 鎢（過渡金屬） 錸（過渡金屬） 鋨（過渡金屬） 銥（過渡金屬） 鉑（過渡金屬） 金（過渡金屬） 汞（過渡金屬） 鉈（貧金屬） 鉛（貧金屬） 鉍（貧金屬） 釙（貧金屬） 砈（類金屬） 氡（惰性氣體）
鍅（鹼金屬） 鐳（鹼土金屬） 錒（錒系元素） 釷（錒系元素） 鏷（錒系元素） 鈾（錒系元素） 錼（錒系元素） 鈽（錒系元素） 鋂（錒系元素） 鋦（錒系元素） 鉳（錒系元素） 鉲（錒系元素） 鑀（錒系元素） 鐨（錒系元素） 鍆（錒系元素） 鍩（錒系元素） 鐒（錒系元素） 鑪（過渡金屬） 𨧀（過渡金屬） 𨭎（過渡金屬） 𨨏（過渡金屬） 𨭆（過渡金屬） 䥑（預測為過渡金屬） 鐽（預測為過渡金屬） 錀（預測為過渡金屬） 鎶（過渡金屬） 鉨（預測為貧金屬） 鈇（貧金屬） 鏌（預測為貧金屬） 鉝（預測為貧金屬） 鿬（預測為鹵素） 鿫（預測為惰性氣體）
氟
↑
氯
↓
溴
硫 ← 氯 → 氬
外觀
淡黃綠色氣體
概況
名稱·符號·序數氯（Chlorine）·Cl·17
元素類別鹵素
族·週期·區17·3·p
標準原子質量35.45(1)
電子排布[Ne] 3s2 3p5
2, 8, 7
氯的電子層（2, 8, 7）
氯的電子層（2, 8, 7）
歷史
發現卡爾·威廉·舍勒（1774年）
分離卡爾·威廉·舍勒（1774年）
最先意識到是元素漢弗里·戴維（1808年）
物理性質
物態氣態
密度（0 °C, 101.325 kPa）
3.2 g/L
沸點時液體密度1.5625 g·cm−3
熔點171.6 K，−101.5 °C，−150.7 °F
沸點239.11 K，−34.04 °C，−29.27 °F
臨界點416.9 K，7.991 MPa
熔化熱(Cl2) 6.406 kJ·mol−1
汽化熱(Cl2) 20.41 kJ·mol−1
比熱容(Cl2)
33.949 J·mol−1·K−1
蒸氣壓
壓/Pa 1 10 100 1 k 10 k 100 k
溫/K 128 139 153 170 197 239
原子性質
氧化態7, 6, 5, 4, 3, 2, 1, −1
（強酸性）
電負性3.16（鮑林標度）
電離能第一：1251.2 kJ·mol−1
第二：2298 kJ·mol−1
第三：3822 kJ·mol−1
（更多）
共價半徑102±4 pm
范德華半徑175 pm
氯的原子譜線
雜項
晶體結構正交
磁序抗磁性
磁化率−40.5·10−6 cm3/mol[1]
電阻率（20 °C）>10 Ω·m
熱導率8.9×10-3 W·m−1·K−1
聲速206（氣態，0 °C） m·s−1
CAS號2) 7782-50-5 (Cl2) 7782-50-5
同位素
主條目：氯的同位素
同位素 豐度 半衰期​（t1/2） 衰變
方式 能量​（MeV） 產物
35Cl 76% 穩定，帶18粒中子
36Cl 痕量 3.01×105年 β− 0.709 36Ar
ε – 36S
37Cl 24% 穩定，帶20粒中子

氯，化學元素，符號為Cl，原子序為17。氯是質量第二低的鹵素，在元素週期表上位於氟和溴之間，其不少性質也介乎兩者之間。在室溫下，氯是一種氣體，呈淡黃綠色。氯的反應性極高，是一種強氧化劑：在所有化學元素中，它的電子親和能最高，鮑林電負性排列第三（僅位於氧和氟以下）。

氯化鈉，亦即食鹽，是地球上最常見的氯化合物，自古便為人所知。1630年前後，氯氣首次在化學反應中產生，但當時並未受人重視。卡爾·威廉·舍勒在1774年記錄下他對氯氣的觀測，並提出它可能是某種新元素的氧化物。化學家在1809年提出氯氣可能是一種純元素，直到1810年經漢弗里·戴維的實驗得以證實。戴維根據「古希臘語：χλωρός，羅馬化：khlôros，直譯：淡綠色」將其名為「chlorine」。

由於氯的反應性極高，因此地殼中的氯元素都是以氯化物的形態存在，食鹽便是其中一種。氯在地殼中的豐度在鹵素之中排第二（氟位列第一），在所有元素之中排第21。然而，地球上絕大部分的氯都在海水裏。

氯氣的商業生產方式是對濃海水進行電解提取。氯的氧化性很高，所以被廣泛用於生產漂白劑和消毒劑，在化工產業中也有諸多用途。許多消費品都含有氯，其中約三分之二是有機化學物，如聚氯乙烯；包括塑料在內的不少材料儘管本身不含氯，但在生產過程中也都需要用到氯和氯化合物。氯氣以及會生成氯氣的化合物可以直接用於對游泳池水進行消毒。高濃度氯氣對於所有生物都屬於毒物，有極高的危險性。第一次世界大戰期間，氯氣曾被用作化學武器，是最早被人類使用的氣體化學武器。

所有已知生物都需要氯離子才能生存，但生物體一般不含其他類型的氯化合物。在人工製成的含氯有機物中，有的對生物體呈惰性，有的則具毒性。大氣上層所含的含氯有機分子包括氯氟烴，是造成臭氧層空洞的主因之一。免疫系統在對付細菌時，中性粒細胞會對氯離子進行氧化，產生次氯酸鹽，從而生成少量氯氣。

歷史

編輯
 
卡爾·威廉·舍勒是最早發現氯氣的化學家

氯化鈉，亦即食鹽，是最常見的氯化合物，自遠古便為人類所知。考古學家發現，人類早在公元前三千年便有利用石鹽，並在公元前六千年利用濃海水。[4]在古典時代，食鹽就在飲食文化中佔據重要的地位，羅馬將領和護民官的薪酬有時會以鹽來支付。1200年前後，王水被發現，人們還發現金能夠溶於其中。這項反應會產生氯氣，但當時人們並未認識到它是一種新的物質。1630年左右，佛拉芒化學家、醫生揚·巴普蒂斯塔·范·海爾蒙特最早描述氯氣在化學反應中的產生。[5][note 1]

瑞典化學家卡爾·威廉·舍勒在1774年首次詳細研究氯，可謂是氯元素的發現者。[6][7]他使軟錳礦（英語：pyrolusite）（含MnO2）與鹽酸反應，製成氯氣：[5]

4 HCl + MnO2 → MnCl2 + 2 H2O + Cl2

舍勒觀察到氯氣的幾項重要性質：它會使石蕊變白，對昆蟲致死，呈黃綠色，且味道似王水。[8]由於氯氣出自鹽酸，所以他稱之為「去燃素鹽酸氣」。[7]不過，舍勒並未意識到氯是一種元素。[7]

當時的化學理論主張，酸是一種含氧的化合物。（今天氧的德語名「sauerstoff」和荷蘭語名「zuurstof」都意為「酸物」，可見其歷史蹤跡。）因此，包括克勞德·貝托萊在內的不少化學家都認為，舍勒的「去燃素鹽酸氣」是氧和某種尚未發現的新元素的化合物。此新元素被稱為「muriaticum」。[9][10]

1809年，約瑟夫·路易·給呂薩克和路易-雅克·泰納爾（英語：Louis-Jacques Thénard）使「去燃素鹽酸氣」和木炭反應，目的是釋放「muriaticum」元素（及二氧化碳）。[7]實驗結果不如所料，兩人在發表的報告中提出「去燃素鹽酸氣」有可能本身就是一種元素，但認為理據不夠充分。[11]

1810年，漢弗里·戴維重複了這項實驗，並斷定「去燃素鹽酸氣」是一種元素，而非化合物。[7]他在同年11月15日向英國皇家學院宣佈此發現。[5]他以希臘文「χλωρος」（chlōros，意為黃綠色）將新元素命名為「chlorine」。[12]約翰·扎洛莫·克里斯托夫·施韋格爾（英語：Johann Salomo Christoph Schweigger）曾經在1811年用「halogen」（意為「產生鹽之物質」）指氯元素。[13] This term was later used as a generic term to describe all the elements in the chlorine family (fluorine, bromine, iodine), after a suggestion by 永斯·貝采利烏斯 in 1826.[14][15] In 1823, Michael Faraday liquefied chlorine for the first time,[16][17][18] and demonstrated that what was then known as "solid chlorine" had a structure of chlorine hydrate (Cl2·H2O).[5]

Chlorine gas was first used by French chemist Claude Berthollet to bleach textiles in 1785.[19][20] Modern bleaches resulted from further work by Berthollet, who first produced sodium hypochlorite in 1789 in his laboratory in the town of Javel (now part of Paris, France), by passing chlorine gas through a solution of sodium carbonate. The resulting liquid, known as "Eau de Javel" ("Javel water"), was a weak solution of sodium hypochlorite. This process was not very efficient, and alternative production methods were sought. Scottish chemist and industrialist Charles Tennant first produced a solution of calcium hypochlorite ("chlorinated lime"), then solid calcium hypochlorite (bleaching powder).[19] These compounds produced low levels of elemental chlorine and could be more efficiently transported than sodium hypochlorite, which remained as dilute solutions because when purified to eliminate water, it became a dangerously powerful and unstable oxidizer. Near the end of the nineteenth century, E. S. Smith patented a method of sodium hypochlorite production involving electrolysis of brine to produce sodium hydroxide and chlorine gas, which then mixed to form sodium hypochlorite.[21] This is known as the chloralkali process, first introduced on an industrial scale in 1892, and now the source of most elemental chlorine and sodium hydroxide.[22] In 1884 Chemischen Fabrik Griesheim of Germany developed another chloralkali process which entered commercial production in 1888.[23]

Elemental chlorine solutions dissolved in chemically basic water (sodium and calcium hypochlorite) were first used as anti-putrefaction agents and disinfectants in the 1820s, in France, long before the establishment of the germ theory of disease. This practice was pioneered by Antoine-Germain Labarraque, who adapted Berthollet's "Javel water" bleach and other chlorine preparations (for a more complete history, see below).[24] Elemental chlorine has since served a continuous function in topical antisepsis (wound irrigation solutions and the like) and public sanitation, particularly in swimming and drinking water.[8]

Chlorine gas was first used as a weapon on April 22, 1915, at Ypres by the German Army.[25][26] The effect on the allies was devastating because the existing gas masks were difficult to deploy and had not been broadly distributed.[27][28]

Properties

編輯
 
Chlorine, liquefied under a pressure of 7.4 bar at room temperature, displayed in a quartz ampule embedded in acrylic glass.
 
Solid chlorine at −150 °C

Chlorine is the second halogen, being a nonmetal in group 17 of the periodic table. Its properties are thus similar to fluorine, bromine, and iodine, and are largely intermediate between those of the first two. Chlorine has the electron configuration [Ne]3s23p5, with the seven electrons in the third and outermost shell acting as its valence electrons. Like all halogens, it is thus one electron short of a full octet, and is hence a strong oxidising agent, reacting with many elements in order to complete its outer shell.[29] Corresponding to periodic trends, it is intermediate in electronegativity between fluorine and bromine (F: 3.98, Cl: 3.16, Br: 2.96, I: 2.66), and is less reactive than fluorine and more reactive than bromine. It is also a weaker oxidising agent than fluorine, but a stronger one than bromine. Conversely, the chloride ion is a weaker reducing agent than bromide, but a stronger one than fluoride.[29] It is intermediate in atomic radius between fluorine and bromine, and this leads to many of its atomic properties similarly continuing the trend from iodine to bromine upward, such as first ionisation energy, electron affinity, enthalpy of dissociation of the X2 molecule (X = Cl, Br, I), ionic radius, and X–X bond length. (Fluorine is anomalous due to its small size.)[29]

All four stable halogens experience intermolecular van der Waals forces of attraction, and their strength increases together with the number of electrons among all homonuclear diatomic halogen molecules. Thus, the melting and boiling points of chlorine are intermediate between those of fluorine and bromine: chlorine melts at −101.0 °C and boils at −34.0 °C. As a result of the increasing molecular weight of the halogens down the group, the density and heats of fusion and vaporisation of chlorine are again intermediate between those of bromine and fluorine, although all their heats of vaporisation are fairly low (leading to high volatility) thanks to their diatomic molecular structure.[29] The halogens darken in colour as the group is descended: thus, while fluorine is a pale yellow gas, chlorine is distinctly yellow-green. This trend occurs because the wavelengths of visible light absorbed by the halogens increase down the group.[29] Specifically, the colour of a halogen, such as chlorine, results from the electron transition between the highest occupied antibonding πg molecular orbital and the lowest vacant antibonding σu molecular orbital.[30] The colour fades at low temperatures, so that solid chlorine at −195 °C is almost colourless.[29]

Like solid bromine and iodine, solid chlorine crystallises in the orthorhombic crystal system, in a layered lattice of Cl2 molecules. The Cl–Cl distance is 198 pm (close to the gaseous Cl–Cl distance of 199 pm) and the Cl···Cl distance between molecules is 332 pm within a layer and 382 pm between layers (compare the van der Waals radius of chlorine, 180 pm). This structure means that chlorine is a very poor conductor of electricity, and indeed its conductivity is so low as to be practically unmeasurable.[29]

Isotopes

編輯
主條目：Isotopes of chlorine

Chlorine has two stable isotopes, 35Cl and 37Cl. These are its only two natural isotopes occurring in quantity, with 35Cl making up 76% of natural chlorine and 37Cl making up the remaining 24%. Both are synthesised in stars in the oxygen-burning and silicon-burning processes.[31] Both have nuclear spin 3/2+ and thus may be used for nuclear magnetic resonance, although the spin magnitude being greater than 1/2 results in non-spherical nuclear charge distribution and thus resonance broadening as a result of a nonzero nuclear quadrupole moment and resultant quadrupolar relaxation. The other chlorine isotopes are all radioactive, with half-lives too short to occur in nature primordially. Of these, the most commonly used in the laboratory are 36Cl (t1/2 = 3.0×105 y) and 38Cl (t1/2 = 37.2 min), which may be produced from the neutron activation of natural chlorine.[29]

The most stable chlorine radioisotope is 36Cl. The primary decay mode of isotopes lighter than 35Cl is electron capture to isotopes of sulfur; that of isotopes heavier than 37Cl is beta decay to isotopes of argon; and 36Cl may decay by either mode to stable 36S or 36Ar.[32] 36Cl occurs in trace quantities in nature as a cosmogenic nuclide in a ratio of about (7–10) × 10−13 to 1 with stable chlorine isotopes: it is produced in the atmosphere by spallation of 36Ar by interactions with cosmic ray protons. In the top meter of the lithosphere, 36Cl is generated primarily by thermal neutron activation of 35Cl and spallation of 39K and 40Ca. In the subsurface environment, muon capture by 40Ca becomes more important as a way to generate 36Cl.[33][34]

Chemistry and compounds

編輯
Halogen bond energies (kJ/mol)[30]
X XX HX BX3 AlX3 CX4
F 159 574 645 582 456
Cl 243 428 444 427 327
Br 193 363 368 360 272
I 151 294 272 285 239

Chlorine is intermediate in reactivity between fluorine and bromine, and is one of the most reactive elements. Chlorine is a weaker oxidising agent than fluorine but a stronger one than bromine or iodine. This can be seen from the standard electrode potentials of the X2/X− couples (F, +2.866 V; Cl, +1.395 V; Br, +1.087 V; I, +0.615 V; At, approximately +0.3 V). However, this trend is not shown in the bond energies because fluorine is singular due to its small size, low polarisability, and lack of low-lying d-orbitals available for bonding (which chlorine has). As another difference, chlorine has a significant chemistry in positive oxidation states while fluorine does not. Chlorination often leads to higher oxidation states than bromination or iodination but lower oxidation states than fluorination. Chlorine tends to react with compounds including M–M, M–H, or M–C bonds to form M–Cl bonds.[30]

Given that E°(1/2O2/H2O) = +1.229 V, which is less than +1.395 V, it would be expected that chlorine should be able to oxidise water to oxygen and hydrochloric acid. However, the kinetics of this reaction are unfavorable, and there is also a bubble overpotential effect to consider, so that electrolysis of aqueous chloride solutions evolves chlorine gas and not oxygen gas, a fact that is very useful for the industrial production of chlorine.[35]

Hydrogen chloride

編輯
 
Structure of solid deuterium chloride, with D···Cl hydrogen bonds

The simplest chlorine compound is hydrogen chloride, HCl, a major chemical in industry as well as in the laboratory, both as a gas and dissolved in water as hydrochloric acid. It is often produced by burning hydrogen gas in chlorine gas, or as a byproduct of chlorinating hydrocarbons. Another approach is to treat sodium chloride with concentrated sulfuric acid to produce hydrochloric acid, also known as the "salt-cake" process:[36]

NaCl + H2SO4 150 °C⟶  NaHSO4 + HCl
NaCl + NaHSO4 540–600 °C⟶  Na2SO4 + HCl

In the laboratory, hydrogen chloride gas may be made by drying the acid with concentrated sulfuric acid. Deuterium chloride, DCl, may be produced by reacting benzoyl chloride with heavy water (D2O).[36]

At room temperature, hydrogen chloride is a colourless gas, like all the hydrogen halides apart from hydrogen fluoride, since hydrogen cannot form strong hydrogen bonds to the larger electronegative chlorine atom; however, weak hydrogen bonding is present in solid crystalline hydrogen chloride at low temperatures, similar to the hydrogen fluoride structure, before disorder begins to prevail as the temperature is raised.[36] Hydrochloric acid is a strong acid (pKa = −7) because the hydrogen bonds to chlorine are too weak to inhibit dissociation. The HCl/H2O system has many hydrates HCl·nH2O for n = 1, 2, 3, 4, and 6. Beyond a 1:1 mixture of HCl and H2O, the system separates completely into two separate liquid phases. Hydrochloric acid forms an azeotrope with boiling point 108.58 °C at 20.22 g HCl per 100 g solution; thus hydrochloric acid cannot be concentrated beyond this point by distillation.[37]

Unlike hydrogen fluoride, anhydrous liquid hydrogen chloride is difficult to work with as a solvent, because its boiling point is low, it has a small liquid range, its dielectric constant is low and it does not dissociate appreciably into H2Cl+ and HCl−
2 ions – the latter, in any case, are much less stable than the bifluoride ions (HF−
2) due to the very weak hydrogen bonding between hydrogen and chlorine, though its salts with very large and weakly polarising cations such as Cs+ and NR+
4 (R = Me, Et, Bun) may still be isolated. Anhydrous hydrogen chloride is a poor solvent, only able to dissolve small molecular compounds such as nitrosyl chloride and phenol, or salts with very low lattice energies such as tetraalkylammonium halides. It readily protonates electrophiles containing lone-pairs or π bonds. Solvolysis, ligand replacement reactions, and oxidations are well-characterised in hydrogen chloride solution:[38]

Ph3SnCl + HCl ⟶ Ph2SnCl2 + PhH (solvolysis)
Ph3COH + 3 HCl ⟶ Ph
3C+
HCl−
2 + H3O+Cl− (solvolysis)
Me
4N+
HCl−
2 + BCl3 ⟶ Me
4N+
BCl−
4 + HCl (ligand replacement)
PCl3 + Cl2 + HCl ⟶ PCl+
4HCl−
2 (oxidation)

Other binary chlorides

編輯
 
Hydrated nickel(II) chloride, NiCl2(H2O)6.

Nearly all elements in the periodic table form binary chlorides. The exceptions are decidedly in the minority and stem in each case from one of three causes: extreme inertness and reluctance to participate in chemical reactions (the noble gases, with the exception of xenon in the highly unstable XeCl2 and XeCl4); extreme nuclear instability hampering chemical investigation before decay and transmutation (many of the heaviest elements beyond bismuth); and having an electronegativity higher than chlorine's (oxygen and fluorine) so that the resultant binary compounds are formally not chlorides but rather oxides or fluorides of chlorine.[39]

Chlorination of metals with Cl2 usually leads to a higher oxidation state than bromination with Br2 when multiple oxidation states are available, such as in MoCl5 and MoBr3. Chlorides can be made by reaction of an element or its oxide, hydroxide, or carbonate with hydrochloric acid, and then dehydrated by mildly high temperatures combined with either low pressure or anhydrous hydrogen chloride gas. These methods work best when the chloride product is stable to hydrolysis; otherwise, the possibilities include high-temperature oxidative chlorination of the element with chlorine or hydrogen chloride, high-temperature chlorination of a metal oxide or other halide by chlorine, a volatile metal chloride, carbon tetrachloride, or an organic chloride. For instance, zirconium dioxide reacts with chlorine at standard conditions to produce zirconium tetrachloride, and uranium trioxide reacts with hexachloropropene when heated under reflux to give uranium tetrachloride. The second example also involves a reduction in oxidation state, which can also be achieved by reducing a higher chloride using hydrogen or a metal as a reducing agent. This may also be achieved by thermal decomposition or disproportionation as follows:[39]

EuCl3 + 1/2 H2 ⟶ EuCl2 + HCl
ReCl5 at "bp"⟶  ReCl3 + Cl2
AuCl3 160 °C⟶  AuCl + Cl2

Most of the chlorides of the pre-transition metals (groups 1, 2, and 3, along with the lanthanides and actinides in the +2 and +3 oxidation states) are mostly ionic, while nonmetals tend to form covalent molecular chlorides, as do metals in high oxidation states from +3 and above. Silver chloride is very insoluble in water and is thus often used as a qualitative test for chlorine.[39]

Polychlorine compounds

編輯

Although dichlorine is a strong oxidising agent with a high first ionisation energy, it may be oxidised under extreme conditions to form the Cl+
2 cation. This is very unstable and has only been characterised by its electronic band spectrum when produced in a low-pressure discharge tube. The yellow Cl+
3 cation is more stable and may be produced as follows:[40]

Cl2 + ClF + AsF5 −78 °C⟶  Cl+
3AsF−
6

This reaction is conducted in the oxidising solvent arsenic pentafluoride. The trichloride anion, Cl−
3, has also been characterised; it is analogous to triiodide.[41]

Chlorine fluorides

編輯

The three fluorides of chlorine form a subset of the interhalogen compounds, all of which are diamagnetic.[41] Some cationic and anionic derivatives are known, such as ClF−
2, ClF−
4, ClF+
2, and Cl2F+.[42] Some pseudohalides of chlorine are also known, such as cyanogen chloride (ClCN, linear), chlorine cyanate (ClNCO), chlorine thiocyanate (ClSCN, unlike its oxygen counterpart), and chlorine azide (ClN3).[41]

Chlorine monofluoride (ClF) is extremely thermally stable, and is sold commercially in 500-gram steel lecture bottles. It is a colourless gas that melts at −155.6 °C and boils at −100.1 °C. It may be produced by the direction of its elements at 225 °C, though it must then be separated and purified from chlorine trifluoride and its reactants. Its properties are mostly intermediate between those of chlorine and fluorine. It will react with many metals and nonmetals from room temperature and above, fluorinating them and liberating chlorine. It will also act as a chlorofluorinating agent, adding chlorine and fluorine across a multiple bond or by oxidation: for example, it will attack carbon monoxide to form carbonyl chlorofluoride, COFCl. It will react analogously with hexafluoroacetone, (CF3)2CO, with a potassium fluoride catalyst to produce heptafluoroisopropyl hypochlorite, (CF3)2CFOCl; with nitriles RCN to produce RCF2NCl2; and with the sulfur oxides SO2 and SO3 to produce ClOSO2F and ClSO2F respectively. It will also react exothermically and violently with compounds containing –OH and –NH groups, such as water:[41]

H2O + 2 ClF ⟶ 2 HF + Cl2O

Chlorine trifluoride (ClF3) is a volatile colourless molecular liquid which melts at −76.3 °C and boils at 11.8 °C. It may be formed by directly fluorinating gaseous chlorine or chlorine monofluoride at 200–300 °C. It is one of the most reactive known chemical compounds, reacting with many substances which in ordinary circumstances would be considered chemically inert, such as asbestos, concrete, and sand. It explodes on contact with water and most organic substances. The list of elements it sets on fire is diverse, containing hydrogen, potassium, phosphorus, arsenic, antimony, sulfur, selenium, tellurium, bromine, iodine, and powdered molybdenum, tungsten, rhodium, iridium, and iron. An impermeable fluoride layer is formed by sodium, magnesium, aluminium, zinc, tin, and silver, which may be removed by heating. When heated, even such noble metals as palladium, platinum, and gold are attacked and even the noble gases xenon and radon do not escape fluorination. Nickel containers are usually used due to that metal's great resistance to attack by chlorine trifluoride, stemming from the formation of an unreactive nickel fluoride layer. Its reaction with hydrazine to form hydrogen fluoride, nitrogen, and chlorine gases was used in experimental rocket motors, but has problems largely stemming from its extreme hypergolicity resulting in ignition without any measurable delay. Today, it is mostly used in nuclear fuel processing, to oxidise uranium to uranium hexafluoride for its enriching and to separate it from plutonium. It can act as a fluoride ion donor or acceptor (Lewis base or acid), although it does not dissociate appreciably into ClF+
2 and ClF−
4 ions.[43]

Chlorine pentafluoride (ClF5) is made on a large scale by direct fluorination of chlorine with excess fluorine gas at 350 °C and 250 atm, and on a small scale by reacting metal chlorides with fluorine gas at 100–300 °C. It melts at −103 °C and boils at −13.1 °C. It is a very strong fluorinating agent, although it is still not as effective as chlorine trifluoride. Only a few specific stoichiometric reactions have been characterised. Arsenic pentafluoride and antimony pentafluoride form ionic adducts of the form [ClF4]+[MF6]− (M = As, Sb) and water reacts vigorously as follows:[44]

2 H2O + ClF5 ⟶ 4 HF + FClO2

The product, chloryl fluoride, is one of the five known chlorine oxide fluorides. These range from the thermally unstable FClO to the chemically unreactive perchloryl fluoride (FClO3), the other three being FClO2, F3ClO, and F3ClO2. All five behave similarly to the chlorine fluorides, both structurally and chemically, and may act as Lewis acids or bases by gaining or losing fluoride ions respectively or as very strong oxidising and fluorinating agents.[45]

Chlorine oxides

編輯
 
Yellow chlorine dioxide (ClO2) gas above a yellow chlorine dioxide solution. Solutions of pure chlorine dioxide are dark green: this solution is yellow due to impurities produced from its photodecomposition.
 
Structure of dichlorine heptoxide, Cl2O7, the most stable of the chlorine oxides

The chlorine oxides are well-studied in spite of their instability (all of them are endothermic compounds). They are important because they are produced when chlorofluorocarbons undergo photolysis in the upper atmosphere and cause the destruction of the ozone layer. None of them can be made from directly reacting the elements.[46]

Dichlorine monoxide (Cl2O) is a brownish-yellow gas (red-brown when solid or liquid) which may be obtained by reacting chlorine gas with yellow mercury(II) oxide. It is very soluble in water, in which it is in equilibrium with hypochlorous acid (HOCl), of which it is the anhydride. It is thus an effective bleach and is mostly used to make hypochlorites. It explodes on heating or sparking or in the presence of ammonia gas.[46]

Chlorine dioxide (ClO2) was the first chlorine oxide to be discovered in 1811 by Humphry Davy. It is a yellow paramagnetic gas (deep-red as a solid or liquid), as expected from its having an odd number of electrons: it is stable towards dimerisation due to the delocalisation of the unpaired electron. It explodes above −40 °C as a liquid and under pressure as a gas and therefore must be made at low concentrations for wood-pulp bleaching and water treatment. It is usually prepared by reducing a chlorate as follows:[46]

ClO−
3 + Cl− + 2 H+ ⟶ ClO2 + 1/2 Cl2 + H2O

Its production is thus intimately linked to the redox reactions of the chlorine oxoacids. It is a strong oxidising agent, reacting with sulfur, phosphorus, phosphorus halides, and potassium borohydride. It dissolves exothermically in water to form dark-green solutions that very slowly decompose in the dark. Crystalline clathrate hydrates ClO2·nH2O (n ≈ 6–10) separate out at low temperatures. However, in the presence of light, these solutions rapidly photodecompose to form a mixture of chloric and hydrochloric acids. Photolysis of individual ClO2 molecules result in the radicals ClO and ClOO, while at room temperature mostly chlorine, oxygen, and some ClO3 and Cl2O6 are produced. Cl2O3 is also produced when photolysing the solid at −78 °C: it is a dark brown solid that explodes below 0 °C. The ClO radical leads to the depletion of atmospheric ozone and is thus environmentally important as follows:[46]

Cl• + O3 ⟶ ClO• + O2
ClO• + O• ⟶ Cl• + O2

Chlorine perchlorate (ClOClO3) is a pale yellow liquid that is less stable than ClO2 and decomposes at room temperature to form chlorine, oxygen, and dichlorine hexoxide (Cl2O6).[46] Chlorine perchlorate may also be considered a chlorine derivative of perchloric acid (HOClO3), similar to the thermally unstable chlorine derivatives of other oxoacids: examples include chlorine nitrate (ClONO2, vigorously reactive and explosive), and chlorine fluorosulfate (ClOSO2F, more stable but still moisture-sensitive and highly reactive).[47] Dichlorine hexoxide is a dark-red liquid that freezes to form a solid which turns yellow at −180 °C: it is usually made by reaction of chlorine dioxide with oxygen. Despite attempts to rationalise it as the dimer of ClO3, it reacts more as though it were chloryl perchlorate, [ClO2]+[ClO4]−, which has been confirmed to be the correct structure of the solid. It hydrolyses in water to give a mixture of chloric and perchloric acids: the analogous reaction with anhydrous hydrogen fluoride does not proceed to completion.[46]

Dichlorine heptoxide (Cl2O7) is the anhydride of perchloric acid (HClO4) and can readily be obtained from it by dehydrating it with phosphoric acid at −10 °C and then distilling the product at −35 °C and 1 mmHg. It is a shock-sensitive, colourless oily liquid. It is the least reactive of the chlorine oxides, being the only one to not set organic materials on fire at room temperature. It may be dissolved in water to regenerate perchloric acid or in aqueous alkalis to regenerate perchlorates. However, it thermally decomposes explosively by breaking one of the central Cl–O bonds, producing the radicals ClO3 and ClO4 which immediately decompose to the elements through intermediate oxides.[46]

Chlorine oxoacids and oxyanions

編輯
Standard reduction potentials for aqueous Cl species[35]
E°(couple) a(H+) = 1
(acid)		 E°(couple) a(OH−) = 1
(base)
Cl2/Cl− +1.358 Cl2/Cl− +1.358
HOCl/Cl− +1.484 ClO−/Cl− +0.890
ClO−
3/Cl−		 +1.459    
HOCl/Cl2 +1.630 ClO−/Cl2 +0.421
HClO2/Cl2 +1.659    
ClO−
3/Cl2		 +1.468    
ClO−
4/Cl2		 +1.277    
HClO2/HOCl +1.701 ClO−
2/ClO−		 +0.681
    ClO−
3/ClO−		 +0.488
ClO−
3/HClO2		 +1.181 ClO−
3/ClO−
2		 +0.295
ClO−
4/ClO−
3		 +1.201 ClO−
4/ClO−
3		 +0.374

Chlorine forms four oxoacids: hypochlorous acid (HOCl), chlorous acid (HOClO), chloric acid (HOClO2), and perchloric acid (HOClO3). As can be seen from the redox potentials given in the adjacent table, chlorine is much more stable towards disproportionation in acidic solutions than in alkaline solutions:[35]

Cl2 + H2O ⇌ HOCl + H+ + Cl− Kac = 4.2 × 10−4 mol2 l−2
Cl2 + 2 OH− ⇌ OCl− + H2O + Cl− Kalk = 7.5 × 1015 mol−1 l

The hypochlorite ions also disproportionate further to produce chloride and chlorate (3 ClO− ⇌ 2 Cl− + ClO−
3) but this reaction is quite slow at temperatures below 70 °C in spite of the very favourable equilibrium constant of 1027. The chlorate ions may themselves disproportionate to form chloride and perchlorate (4 ClO−
3 ⇌ Cl− + 3 ClO−
4) but this is still very slow even at 100 °C despite the very favourable equilibrium constant of 1020. The rates of reaction for the chlorine oxyanions increases as the oxidation state of chlorine decreases. The strengths of the chlorine oxyacids increase very quickly as the oxidation state of chlorine increases due to the increasing delocalisation of charge over more and more oxygen atoms in their conjugate bases.[35]

Most of the chlorine oxoacids may be produced by exploiting these disproportionation reactions. Hypochlorous acid (HOCl) is highly reactive and quite unstable; its salts are mostly used for their bleaching and sterilising abilities. They are very strong oxidising agents, transferring an oxygen atom to most inorganic species. Chlorous acid (HOClO) is even more unstable and cannot be isolated or concentrated without decomposition: it is known from the decomposition of aqueous chlorine dioxide. However, sodium chlorite is a stable salt and is useful for bleaching and stripping textiles, as an oxidising agent, and as a source of chlorine dioxide. Chloric acid (HOClO2) is a strong acid that is quite stable in cold water up to 30% concentration, but on warming gives chlorine and chlorine dioxide. Evaporation under reduced pressure allows it to be concentrated further to about 40%, but then it decomposes to perchloric acid, chlorine, oxygen, water, and chlorine dioxide. Its most important salt is sodium chlorate, mostly used to make chlorine dioxide to bleach paper pulp. The decomposition of chlorate to chloride and oxygen is a common way to produce oxygen in the laboratory on a small scale. Chloride and chlorate may comproportionate to form chlorine as follows:[48]

ClO−
3 + 5 Cl− + 6 H+ ⟶ 3 Cl2 + 3 H2O

Perchlorates and perchloric acid (HOClO3) are the most stable oxo-compounds of chlorine, in keeping with the fact that chlorine compounds are most stable when the chlorine atom is in its lowest (−1) or highest (+7) possible oxidation states. Perchloric acid and aqueous perchlorates are vigorous and sometimes violent oxidising agents when heated, in stark contrast to their mostly inactive nature at room temperature due to the high activation energies for these reactions for kinetic reasons. Perchlorates are made by electrolytically oxidising sodium chlorate, and perchloric acid is made by reacting anhydrous sodium perchlorate or barium perchlorate with concentrated hydrochloric acid, filtering away the chloride precipitated and distilling the filtrate to concentrate it. Anhydrous perchloric acid is a colourless mobile liquid that is sensitive to shock that explodes on contact with most organic compounds, sets hydrogen iodide and thionyl chloride on fire and even oxidises silver and gold. Although it is a weak ligand, weaker than water, a few compounds involving coordinated ClO−
4 are known.[48]

Organochlorine compounds

編輯
主條目：Organochlorine compound
 
Suggested mechanism for the chlorination of a carboxylic acid by phosphorus pentachloride to form an acyl chloride

Like the other carbon–halogen bonds, the C–Cl bond is a common functional group that forms part of core organic chemistry. Formally, compounds with this functional group may be considered organic derivatives of the chloride anion. Due to the difference of electronegativity between chlorine (3.16) and carbon (2.55), the carbon in a C–Cl bond is electron-deficient and thus electrophilic. Chlorination modifies the physical properties of hydrocarbons in several ways: chlorocarbons are typically denser than water due to the higher atomic weight of chlorine versus hydrogen, and aliphatic organochlorides are alkylating agents because chloride is a leaving group.[49]

Alkanes and aryl alkanes may be chlorinated under free-radical conditions, with UV light. However, the extent of chlorination is difficult to control: the reaction is not regioselective and often results in a mixture of various isomers with different degrees of chlorination, though this may be permissible if the products are easily separated. Aryl chlorides may be prepared by the Friedel-Crafts halogenation, using chlorine and a Lewis acid catalyst.[49] The haloform reaction, using chlorine and sodium hydroxide, is also able to generate alkyl halides from methyl ketones, and related compounds. Chlorine adds to the multiple bonds on alkenes and alkynes as well, giving di- or tetra-chloro compounds. However, due to the expense and reactivity of chlorine, organochlorine compounds are more commonly produced by using hydrogen chloride, or with chlorinating agents such as phosphorus pentachloride (PCl5) or thionyl chloride (SOCl2). The last is very convenient in the laboratory because all side products are gaseous and do not have to be distilled out.[49]

Many organochlorine compounds have been isolated from natural sources ranging from bacteria to humans.[50][51] Chlorinated organic compounds are found in nearly every class of biomolecules including alkaloids, terpenes, amino acids, flavonoids, steroids, and fatty acids.[50][52] Organochlorides, including dioxins, are produced in the high temperature environment of forest fires, and dioxins have been found in the preserved ashes of lightning-ignited fires that predate synthetic dioxins.[53] In addition, a variety of simple chlorinated hydrocarbons including dichloromethane, chloroform, and carbon tetrachloride have been isolated from marine algae.[54] A majority of the chloromethane in the environment is produced naturally by biological decomposition, forest fires, and volcanoes.[55]

Some types of organochlorides, though not all, have significant toxicity to plants or animals, including humans. Dioxins, produced when organic matter is burned in the presence of chlorine, and some insecticides, such as DDT, are persistent organic pollutants which pose dangers when they are released into the environment. For example, DDT, which was widely used to control insects in the mid 20th century, also accumulates in food chains, and causes reproductive problems (e.g., eggshell thinning) in certain bird species.[56] Due to the ready homolytic fission of the C–Cl bond to create chlorine radicals in the upper atmosphere, chlorofluorocarbons have been phased out due to the harm they do to the ozone layer.[46]

Occurrence and production

編輯
主條目：Chlorine production和Chloralkali process
 
Liquid chlorine analysis

Chlorine is too reactive to occur as the free element in nature but is very abundant in the form of its chloride salts. It is the twentieth most abundant element in Earth's crust and makes up 126 parts per million of it, through the large deposits of chloride minerals, especially sodium chloride, that have been evaporated from water bodies. All of these pale in comparison to the reserves of chloride ions in seawater: smaller amounts at higher concentrations occur in some inland seas and underground brine wells, such as the Great Salt Lake in Utah and the Dead Sea in Israel.[57]

Small batches of chlorine gas are prepared in the laboratory by combining hydrochloric acid and manganese dioxide, but the need rarely arises due to its ready availability. In industry, elemental chlorine is usually produced by the electrolysis of sodium chloride dissolved in water. This method, the chloralkali process industrialized in 1892, now provides most industrial chlorine gas.[22] Along with chlorine, the method yields hydrogen gas and sodium hydroxide, which is the most valuable product. The process proceeds according to the following chemical equation:[58]

2 NaCl + 2 H2O → Cl2 + H2 + 2 NaOH

The electrolysis of chloride solutions all proceed according to the following equations:

Cathode: 2 H2O + 2 e− → H2 + 2 OH−
Anode: 2 Cl− → Cl2 + 2 e−

In diaphragm cell electrolysis, an asbestos (or polymer-fiber) diaphragm separates a cathode and an anode, preventing the chlorine forming at the anode from re-mixing with the sodium hydroxide and the hydrogen formed at the cathode.[59] The salt solution (brine) is continuously fed to the anode compartment and flows through the diaphragm to the cathode compartment, where the caustic alkali is produced and the brine is partially depleted. Diaphragm methods produce dilute and slightly impure alkali, but they are not burdened with the problem of mercury disposal and they are more energy efficient.[22]

Membrane cell electrolysis employs permeable membrane as an ion exchanger. Saturated sodium (or potassium) chloride solution is passed through the anode compartment, leaving at a lower concentration. This method also produces very pure sodium (or potassium) hydroxide but has the disadvantage of requiring very pure brine at high concentrations.[60]

 
Membrane cell process for chloralkali production

In the Deacon process, hydrogen chloride recovered from the production of organochlorine compounds is recovered as chlorine. The process relies on oxidation using oxygen:

4 HCl + O2 → 2 Cl2 + 2 H2O

The reaction requires a catalyst. As introduced by Deacon, early catalysts were based on copper. Commercial processes, such as the Mitsui MT-Chlorine Process, have switched to chromium and ruthenium-based catalysts.[61] The chlorine produced is available in cylinders from sizes ranging from 450 g to 70 kg, as well as drums (865 kg), tank wagons (15 tonnes on roads; 27–90 tonnes by rail), and barges (600–1200 tonnes).[62]

Applications

編輯

Sodium chloride is by a huge margin the most common chlorine compound, and it is the main source of chlorine and hydrochloric acid for the enormous chlorine-chemicals industry today. About 15000 chlorine-containing compounds are commercially traded, including such diverse compounds as chlorinated methanes and ethanes, vinyl chloride and its polymer polyvinyl chloride (PVC), aluminium trichloride for catalysis, the chlorides of magnesium, titanium, zirconium, and hafnium which are the precursors for producing the pure elements, and so on.[8]

Quantitatively, of all elemental chlorine produced, about 63% is used in the manufacture of organic compounds, and 18% in the manufacture of inorganic chlorine compounds.[63] About 15,000 chlorine compounds are used commercially.[64] The remaining 19% of chlorine produced is used for bleaches and disinfection products.[62] The most significant of organic compounds in terms of production volume are 1,2-dichloroethane and vinyl chloride, intermediates in the production of PVC. Other particularly important organochlorines are methyl chloride, methylene chloride, chloroform, vinylidene chloride, trichloroethylene, perchloroethylene, allyl chloride, epichlorohydrin, chlorobenzene, dichlorobenzenes, and trichlorobenzenes. The major inorganic compounds include HCl, Cl2O, HOCl, NaClO3, chlorinated isocyanurates, AlCl3, SiCl4, SnCl4, PCl3, PCl5, POCl3, AsCl3, SbCl3, SbCl5, BiCl3, S2Cl2, SCl2, SOCI2, ClF3, ICl, ICl3, TiCl3, TiCl4, MoCl5, FeCl3, ZnCl2, and so on.[62]

Sanitation, disinfection, and antisepsis

編輯
主條目：Water chlorination和Bleach

Combating putrefaction

編輯
 
Antoine-Germain Labarraque

In France (as elsewhere), animal intestines were processed to make musical instrument strings, Goldbeater's skin and other products. This was done in "gut factories" (boyauderies), and it was an odiferous and unhealthy process. In or about 1820, the Société d'encouragement pour l'industrie nationale offered a prize for the discovery of a method, chemical or mechanical, for separating the peritoneal membrane of animal intestines without putrefaction.[65][66] The prize was won by Antoine-Germain Labarraque, a 44-year-old French chemist and pharmacist who had discovered that Berthollet's chlorinated bleaching solutions ("Eau de Javel") not only destroyed the smell of putrefaction of animal tissue decomposition, but also actually retarded the decomposition.[66][67]

Labarraque's research resulted in the use of chlorides and hypochlorites of lime (calcium hypochlorite) and of sodium (sodium hypochlorite) in the boyauderies. The same chemicals were found to be useful in the routine disinfection and deodorization of latrines, sewers, markets, abattoirs, anatomical theatres, and morgues.[68] They were successful in hospitals, lazarets, prisons, infirmaries (both on land and at sea), magnaneries, stables, cattle-sheds, etc.; and they were beneficial during exhumations,[69] embalming, outbreaks of epidemic disease, fever, and blackleg in cattle.[65]

Disinfection

編輯

Labarraque's chlorinated lime and soda solutions have been advocated since 1828 to prevent infection (called "contagious infection", presumed to be transmitted by "miasmas"), and to treat putrefaction of existing wounds, including septic wounds.[70] In his 1828 work, Labarraque recommended that doctors breathe chlorine, wash their hands in chlorinated lime, and even sprinkle chlorinated lime about the patients' beds in cases of "contagious infection". In 1828, the contagion of infections was well known, even though the agency of the microbe was not discovered until more than half a century later.

During the Paris cholera outbreak of 1832, large quantities of so-called chloride of lime were used to disinfect the capital. This was not simply modern calcium chloride, but chlorine gas dissolved in lime-water (dilute calcium hydroxide) to form calcium hypochlorite (chlorinated lime). Labarraque's discovery helped to remove the terrible stench of decay from hospitals and dissecting rooms, and by doing so, effectively deodorised the Latin Quarter of Paris.[71] These "putrid miasmas" were thought by many to cause the spread of "contagion" and "infection" – both words used before the germ theory of infection. Chloride of lime was used for destroying odors and "putrid matter". One source claims chloride of lime was used by Dr. John Snow to disinfect water from the cholera-contaminated well that was feeding the Broad Street pump in 1854 London,[72] though three other reputable sources that describe that famous cholera epidemic do not mention the incident.[73][74][75] One reference makes it clear that chloride of lime was used to disinfect the offal and filth in the streets surrounding the Broad Street pump—a common practice in mid-nineteenth century England.[73]:296

Semmelweis and experiments with antisepsis

編輯
 
Ignaz Semmelweis

Perhaps the most famous application of Labarraque's chlorine and chemical base solutions was in 1847, when Ignaz Semmelweis used chlorine-water (chlorine dissolved in pure water, which was cheaper than chlorinated lime solutions) to disinfect the hands of Austrian doctors, which Semmelweis noticed still carried the stench of decomposition from the dissection rooms to the patient examination rooms. Long before the germ theory of disease, Semmelweis theorized that "cadaveric particles" were transmitting decay from fresh medical cadavers to living patients, and he used the well-known "Labarraque's solutions" as the only known method to remove the smell of decay and tissue decomposition (which he found that soap did not). The solutions proved to be far more effective antiseptics than soap (Semmelweis was also aware of their greater efficacy, but not the reason), and this resulted in Semmelweis's celebrated success in stopping the transmission of childbed fever ("puerperal fever") in the maternity wards of Vienna General Hospital in Austria in 1847.[76]

Much later, during World War I in 1916, a standardized and diluted modification of Labarraque's solution containing hypochlorite (0.5%) and boric acid as an acidic stabilizer, was developed by Henry Drysdale Dakin (who gave full credit to Labarraque's prior work in this area). Called Dakin's solution, the method of wound irrigation with chlorinated solutions allowed antiseptic treatment of a wide variety of open wounds, long before the modern antibiotic era. A modified version of this solution continues to be employed in wound irrigation in modern times, where it remains effective against bacteria that are resistant to multiple antibiotics (see Century Pharmaceuticals).[77]

Public sanitation

編輯
 
Liquid Pool Chlorine

The first continuous application of chlorination to drinking U.S. water was installed in Jersey City, New Jersey in 1908.[78] By 1918, the US Department of Treasury called for all drinking water to be disinfected with chlorine. Chlorine is presently an important chemical for water purification (such as in water treatment plants), in disinfectants, and in bleach. Even small water supplies are now routinely chlorinated.[79]

Chlorine is usually used (in the form of hypochlorous acid) to kill bacteria and other microbes in drinking water supplies and public swimming pools. In most private swimming pools, chlorine itself is not used, but rather sodium hypochlorite, formed from chlorine and sodium hydroxide, or solid tablets of chlorinated isocyanurates. The drawback of using chlorine in swimming pools is that the chlorine reacts with the proteins in human hair and skin. The distinctive 'chlorine aroma' associated with swimming pools is not the result of chlorine itself, but of chloramine, a chemical compound produced by the reaction of free dissolved chlorine with amines in organic substances. As a disinfectant in water, chlorine is more than three times as effective against Escherichia coli as bromine, and more than six times as effective as iodine.[80] Increasingly, chloramine itself is being directly added to drinking water for purposes of disinfection, a process known as chloramination.[81]

It is often impractical to store and use poisonous chlorine gas for water treatment, so alternative methods of adding chlorine are used. These include hypochlorite solutions, which gradually release chlorine into the water, and compounds like sodium dichloro-s-triazinetrione (dihydrate or anhydrous), sometimes referred to as "dichlor", and trichloro-s-triazinetrione, sometimes referred to as "trichlor". These compounds are stable while solid and may be used in powdered, granular, or tablet form. When added in small amounts to pool water or industrial water systems, the chlorine atoms hydrolyze from the rest of the molecule forming hypochlorous acid (HOCl), which acts as a general biocide, killing germs, micro-organisms, algae, and so on.[82][83]

Use as a weapon

編輯

World War I

編輯
主條目：Chemical weapons in World War I

Chlorine gas, also known as bertholite, was first used as a weapon in World War I by Germany on April 22, 1915 in the Second Battle of Ypres.[84][85] As described by the soldiers, it had the distinctive smell of a mixture of pepper and pineapple. It also tasted metallic and stung the back of the throat and chest. Chlorine reacts with water in the mucosa of the lungs to form hydrochloric acid, destructive to living tissue and potentially lethal. Human respiratory systems can be protected from chlorine gas by gas masks with activated charcoal or other filters, which makes chlorine gas much less lethal than other chemical weapons. It was pioneered by a German scientist later to be a Nobel laureate, Fritz Haber of the Kaiser Wilhelm Institute in Berlin, in collaboration with the German chemical conglomerate IG Farben, which developed methods for discharging chlorine gas against an entrenched enemy.[86] After its first use, both sides in the conflict used chlorine as a chemical weapon, but it was soon replaced by the more deadly phosgene and mustard gas.[87]

Iraq

編輯
主條目：Chlorine bombings in Iraq

Chlorine gas was also used during the Iraq War in Anbar Province in 2007, with insurgents packing truck bombs with mortar shells and chlorine tanks. The attacks killed two people from the explosives and sickened more than 350. Most of the deaths were caused by the force of the explosions rather than the effects of chlorine since the toxic gas is readily dispersed and diluted in the atmosphere by the blast. In some bombings, over a hundred civilians were hospitalized due to breathing difficulties. The Iraqi authorities tightened security for elemental chlorine, which is essential for providing safe drinking water to the population.[88][89]

On 24 October 2014, it was reported that the Islamic State of Iraq and the Levant had used chlorine gas in the town of Duluiyah, Iraq.[90] Laboratory analysis of clothing and soil samples confirmed the use of chlorine gas against Kurdish Peshmerga Forces in a vehicle-borne improvised explosive device attack on 23 January 2015 at the Highway 47 Kiske Junction near Mosul.[91]

Syria

編輯
主條目：Use of chemical weapons in the Syrian Civil War

The Syrian government has allegedly used chlorine as a chemical weapon[92] delivered from barrel bombs and rockets.[93] [94]

Biological role

編輯

The chloride anion is an essential nutrient for metabolism. Chlorine is needed for the production of hydrochloric acid in the stomach and in cellular pump functions.[95] The main dietary source is table salt, or sodium chloride. Overly low or high concentrations of chloride in the blood are examples of electrolyte disturbances. Hypochloremia (having too little chloride) rarely occurs in the absence of other abnormalities. It is sometimes associated with hypoventilation.[96] It can be associated with chronic respiratory acidosis.[97] Hyperchloremia (having too much chloride) usually does not produce symptoms. When symptoms do occur, they tend to resemble those of hypernatremia (having too much sodium). Reduction in blood chloride leads to cerebral dehydration; symptoms are most often caused by rapid rehydration which results in cerebral edema. Hyperchloremia can affect oxygen transport.[98]

Hazards

編輯
Yinweichen/Testpage6
危險性
GHS危險性符號
   
GHS提示詞 Danger
H-術語 H270, H315, H319, H331, H335, H400
P-術語 P220, P244, P261, P304, P340, P312, P403, P233, P410, P403[99]
NFPA 704
0
3
0
 
若非註明，所有數據均出自標準狀態（25 ℃，100 kPa）下。

Chlorine is a toxic gas that attacks the respiratory system, eyes, and skin.[100] Because it is denser than air, it tends to accumulate at the bottom of poorly ventilated spaces. Chlorine gas is a strong oxidizer, which may react with flammable materials.[101][102]

Chlorine is detectable with measuring devices in concentrations as low as 0.2 parts per million (ppm), and by smell at 3 ppm. Coughing and vomiting may occur at 30 ppm and lung damage at 60 ppm. About 1000 ppm can be fatal after a few deep breaths of the gas.[8] The IDLH (immediately dangerous to life and health) concentration is 10 ppm.[103] Breathing lower concentrations can aggravate the respiratory system and exposure to the gas can irritate the eyes.[104] The toxicity of chlorine comes from its oxidizing power. When chlorine is inhaled at concentrations greater than 30 ppm, it reacts with water and cellular fluid, producing hydrochloric acid (HCl) and hypochlorous acid (HClO).

When used at specified levels for water disinfection, the reaction of chlorine with water is not a major concern for human health. Other materials present in the water may generate disinfection by-products that are associated with negative effects on human health.[105][106]

In the United States, the Occupational Safety and Health Administration (OSHA) has set the permissible exposure limit for elemental chlorine at 1 ppm, or 3 mg/m3. The National Institute for Occupational Safety and Health has designated a recommended exposure limit of 0.5 ppm over 15 minutes.[103]

In the home, accidents occur when hypochlorite bleach solutions come into contact with certain acidic drain-cleaners to produce chlorine gas.[107] Hypochlorite bleach (a popular laundry additive) combined with ammonia (another popular laundry additive) produces chloramines, another toxic group of chemicals.[108]

Chlorine-induced cracking in structural materials

編輯
 
Chlorine "attack" on an acetal resin plumbing joint resulting from a fractured acetal joint in a water supply system which started at an injection molding defect in the joint and slowly grew until the part failed; the fracture surface shows iron and calcium salts that were deposited in the leaking joint from the water supply before failure and are the indirect result of the chlorine attack

Chlorine is widely used for purifying water, especially potable water supplies and water used in swimming pools. Several catastrophic collapses of swimming pool ceilings have occurred from chlorine-induced stress corrosion cracking of stainless steel suspension rods.[109] Some polymers are also sensitive to attack, including acetal resin and polybutene. Both materials were used in hot and cold water domestic plumbing, and stress corrosion cracking caused widespread failures in the US in the 1980s and 1990s. [110]

Chlorine-iron fire

編輯

The element iron can combine with chlorine at high temperatures in a strong exothermic reaction, creating a chlorine-iron fire.[111][112] Chlorine-iron fires are a risk in chemical process plants, where much of the pipework that carries chlorine gas is made of steel.[111][112]

See also

編輯

References

編輯
  1. ^ Weast, Robert. CRC, Handbook of Chemistry and Physics. Boca Raton, Florida: Chemical Rubber Company Publishing. 1984: E110. ISBN 0-8493-0464-4. 
  2. ^ Chlorine, Gas Encyclopaedia, Air Liquide
  3. ^ Magnetic susceptibility of the elements and inorganic compounds, in Lide, D. R. (編), CRC Handbook of Chemistry and Physics 86th, Boca Raton (FL): CRC Press, 2005, ISBN 0-8493-0486-5 
  4. ^ The earliest salt production in the world: an early Neolithic exploitation in Poiana Slatinei-Lunca, Romania. [2008-07-10]. （原始內容存檔於April 30, 2011）. 
  5. ^ 5.0 5.1 5.2 5.3 Greenwood and Earnshaw, p. 789–92
  6. ^ Scheele, Carl Wilhelm. Om Brunsten, eller Magnesia, och dess Egenskaper [On braunstein [i.e., pyrolusite, manganese dioxide], or magnesia, and its properties]. Kongliga Vetenskaps Academiens Handlingar [Proceedings of the Royal Scientific Academy]. 1774, 35: 89–116, 177–194 （Swedish）.  In section 6 on pp. 93–94 of his paper, Scheele described how chlorine was produced when a mixture of hydrochloric acid and manganese dioxide (Brunsten) was heated: "6) (a) På 1/2 uns fint rifven Brunsten slogs 1 uns ren Spiritus salis. … samt lukten fo̊rsvunnen." ( 6) (a) On one half ounce of finely ground Braunstein [pyrolusite] was poured one ounce of pure spiritus salis [spirit of salt, hydrogen chloride]. After this mixture had been standing in the cold for one hour, the acid had assumed a dark brown colour. One part of this solution was poured into a glass, which was placed over the fire. The solution gave off an odour like warm aqua regia and after one quarter’s hour duration, it was as clear and colourless as water, and the smell had disappeared.) For an English translation of the relevant passages of this article, see: The Early History of Chlorine : Papers by Carl Wilhelm Scheele (1774), C. L. Berthollet (1785), Guyton de Morveau (1787), J. L. Gay-Lussac and L. J. Thenard (1809) (Edinburgh, Scotland: Alembic Club, 1912), pp. 5–10.
  7. ^ 7.0 7.1 7.2 7.3 7.4 17 Chlorine. Elements.vanderkrogt.net. [2008-09-12]. （原始內容存檔於2010-01-23）. 
  8. ^ 8.0 8.1 8.2 8.3 Greenwood and Earnshaw, pp. 792–93
  9. ^ Ihde, Aaron John. The development of modern chemistry. Courier Dover Publications. 1984: 158. ISBN 978-0-486-64235-2. 
  10. ^ Weeks, Mary Elvira. The discovery of the elements. XVII. The halogen family. Journal of Chemical Education. 1932, 9 (11): 1915. Bibcode:1932JChEd...9.1915W. doi:10.1021/ed009p1915. 
  11. ^ Gay-Lussac; Thenard. Extrait des mémoires lus à l'Institut national, depuis le 7 mars 1808 jusqu'au 27 février 1809. [Extracts from memoirs read at the national Institute, from 7 March 1808 to 27 February 1809]. Mémoires de Physique et de Chimie de la Société d'Arcueil. 1809, 2: 295–358.  See: § De la nature et des propriétés de l'acide muriatique et de l'acide muriatique oxigéné (On the nature and properties of muriatic acid and of oxidized muriatic acid), pp. 339–358. From pp. 357–358: "Le gaz muriatique oxigéné n'est pas, en effect, décomposé … comme un corps composé." ("In fact, oxygenated muriatic acid is not decomposed by charcoal, and it might be supposed, from this fact and those that are communicated in this Memoir, that this gas is a simple body. The phenomena that it presents can be explained well enough on this hypothesis; we shall not seek to defend it, however, as it appears to us that they are still better explained by regarding oxygenated muriatic acid as a compound body.") For a full English translation of this section, see: Joseph Louis Gay-Lussac and Louis Jacques Thénard, "On the nature and the properties of muriatic acid and of oxygenated muriatic acid" (Lemoyne College, Syracuse, New York, USA)
  12. ^ Davy, Humphry. The Bakerian Lecture. On some of the combinations of oxymuriatic gas and oxygene, and on the chemical relations of these principles, to inflammable bodies. Philosophical Transactions of the Royal Society of London. 1811, 101: 1–35. Bibcode:1811RSPT..101....1D. doi:10.1098/rstl.1811.0001.  Davy named chlorine on p. 32: "After consulting some of the most eminent chemical philosophers in this country, it has been judged most proper to suggest a name founded upon one of its obvious and characteristic properties — its colour, and to call it Chlorine, or Chloric gas.* *From χλωρος."
  13. ^ Schweigger, J.S.C. Nachschreiben des Herausgebers, die neue Nomenclatur betreffend [Postscript of the editor concerning the new nomenclature]. Journal für Chemie und Physik. 1811, 3 (2): 249–255 （German）.  On p. 251, Schweigger proposed the word "halogen": "Man sage dafür lieber mit richter Wortbildung Halogen (da schon in der Mineralogie durch Werner's Halit-Geschlecht dieses Wort nicht fremd ist) von αλς Salz und dem alten γενειν (dorisch γενεν) zeugen." (One should say instead, with proper morphology, "halogen" (this word is not strange since [it's] already in mineralogy via Werner's "halite" species) from αλς [als] "salt" and the old γενειν [genein] (Doric γενεν) "to beget".)
  14. ^ In 1826, Berzelius coined the terms Saltbildare (salt-formers) and Corpora Halogenia (salt-making substances) for the elements chlorine, iodine, and fluorine. See: Berzelius, Jacob. Årsberättelser om Framstegen i Physik och Chemie [Annual Report on Progress in Physics and Chemistry] vol. 6. Stockholm, Sweden: P.A. Norstedt & Söner. 1826: 187 （Swedish）.  From p. 187: "De förre af dessa, d. ä. de electronegativa, dela sig i tre klasser: 1) den första innehåller kroppar, som förenade med de electropositiva, omedelbart frambringa salter, hvilka jag derför kallar Saltbildare (Corpora Halogenia). Desse utgöras af chlor, iod och fluor *)." (The first of them [i.e., elements], i.e., the electronegative [ones], are divided into three classes: 1) The first includes substances which, [when] united with electropositive [elements], immediately produce salts, and which I therefore name "salt-formers" (salt-producing substances). These are chlorine, iodine, and fluorine *).)
  15. ^ Snelders, H. A. M. J. S. C. Schweigger: His Romanticism and His Crystal Electrical Theory of Matter. Isis. 1971, 62 (3): 328–338. JSTOR 229946. doi:10.1086/350763. 
  16. ^ Faraday, M. On fluid chlorine. Philosophical Transactions of the Royal Society of London. 1823, 113: 160–164. Bibcode:1823RSPT..113..160F. doi:10.1098/rstl.1823.0016. 
  17. ^ Chodos, Alan (編). This Month in Physics History September 4, 1821 and August 29, 1831: Faraday and Electromagnetism. American Physical Society. [2010-05-08]. （原始內容存檔於June 15, 2010）. 
  18. ^ O'Connor J. J.; Robertson E. F. Michael Faraday. School of Mathematics and Statistics, University of St Andrews, Scotland. [2010-05-08]. （原始內容存檔於2010-02-20）. 
  19. ^ 19.0 19.1 Bleaching. Encyclopædia Britannica 9th Edition (1875) and 10th Edition (1902). [2012-05-02]. （原始內容存檔於2012-05-24）. 
  20. ^ Aspin, Chris. The Cotton Industry. Shire Publications Ltd. 1981: 24. ISBN 978-0-85263-545-2. 
  21. ^ Paul May. Bleach (Sodium Hypochlorite). University of Bristol. [13 December 2016]. （原始內容存檔於13 December 2016）. 
  22. ^ 22.0 22.1 22.2 Greenwood and Earnshaw, p. 798
  23. ^ Almqvist, Ebbe. History of Industrial Gases. Springer Science & Business Media. 2003: 220. ISBN 978-0-306-47277-0. 
  24. ^ Bouvet, Maurice. Les grands pharmaciens: Labarraque (1777–1850) [The great pharmacists: Labarraque (1777–1850)]. Revue d'Histoire de la Pharmacie. 1950, 38 (128): 97–107. doi:10.3406/pharm.1950.8662 （French）. 
  25. ^ Chlorine – History (PDF). [2008-07-10]. （原始內容 (PDF)存檔於21 February 2007）. 
  26. ^ Weaponry: Use of Chlorine Gas Cylinders in World War I. historynet.com. 2006-06-12 [2008-07-10]. （原始內容存檔於2008-07-02）. 
  27. ^ Staff. On the Western Front, Ypres 1915. Veteran Affairs Canada. 29 July 2004 [2008-04-08]. （原始內容存檔於14 August 2011）. 
  28. ^ Lefebure, Victor; Wilson, Henry. The Riddle of the Rhine: Chemical Strategy in Peace and War. Kessinger Publishing. 2004. ISBN 978-1-4179-3546-8. 
  29. ^ 29.0 29.1 29.2 29.3 29.4 29.5 29.6 29.7 Greenwood and Earnshaw, pp. 800–4
  30. ^ 30.0 30.1 30.2 Greenwood and Earnshaw, pp. 804–09
  31. ^ Cameron, A. G. W. Abundance of the Elements in the Solar System (PDF). Space Science Reviews. 1973, 15 (1): 121–46. Bibcode:1973SSRv...15..121C. doi:10.1007/BF00172440. （原始內容 (PDF)存檔於2011-10-21）. 
  32. ^ Audi, Georges; Bersillon, Olivier; Blachot, Jean; Wapstra, Aaldert Hendrik. The NUBASE evaluation of nuclear and decay properties. Nuclear Physics A. 2003, 729: 3–128. Bibcode:2003NuPhA.729....3A. ISSN 0375-9474. doi:10.1016/j.nuclphysa.2003.11.001. 
  33. ^ M. Zreda; et al. Cosmogenic chlorine-36 production rates in terrestrial rocks. Earth and Planetary Science Letters. 1991, 105 (1–3): 94–109. Bibcode:1991E&PSL.105...94Z. doi:10.1016/0012-821X(91)90123-Y. 
  34. ^ M. Sheppard and M. Herod. Variation in background concentrations and specific activities of 36Cl, 129I and U/Th-series radionuclides in surface waters. Journal of Environmental Radioactivity. 2012, 106: 27–34. PMID 22304997. doi:10.1016/j.jenvrad.2011.10.015. 
  35. ^ 35.0 35.1 35.2 35.3 Greenwood and Earnshaw, pp. 853–56
  36. ^ 36.0 36.1 36.2 Greenwood and Earnshaw, pp. 809–12
  37. ^ Greenwood and Earnshaw, pp. 812–16
  38. ^ Greenwood and Earnshaw, pp. 818–19
  39. ^ 39.0 39.1 39.2 Greenwood and Earnshaw, pp. 821–44
  40. ^ Greenwood and Earnshaw, pp. 842–44
  41. ^ 41.0 41.1 41.2 41.3 Greenwood and Earnshaw, pp. 824–8
  42. ^ Greenwood and Earnshaw, pp. 835–42
  43. ^ Greenwood and Earnshaw, pp. 828–31
  44. ^ Greenwood and Earnshaw, pp. 832–35
  45. ^ Greenwood and Earnshaw, pp. 875–80
  46. ^ 46.0 46.1 46.2 46.3 46.4 46.5 46.6 46.7 Greenwood and Earnshaw, pp. 844–50
  47. ^ Greenwood and Earnshaw, pp. 883–5
  48. ^ 48.0 48.1 Greenwood and Earnshaw, pp. 856–70
  49. ^ 49.0 49.1 49.2 M. Rossberg et al. "Chlorinated Hydrocarbons" in Ullmann's Encyclopedia of Industrial Chemistry 2006, Wiley-VCH, Weinheim. doi:10.1002/14356007.a06_233.pub2
  50. ^ 50.0 50.1 Gordon W. Gribble. Naturally Occurring Organohalogen Compounds. Acc. Chem. Res. 1998, 31 (3): 141–52. doi:10.1021/ar9701777. 
  51. ^ Gordon W. Gribble. The diversity of naturally occurring organobromine compounds. Chemical Society Reviews. 1999, 28 (5): 335–46. doi:10.1039/a900201d. 
  52. ^ Kjeld C. Engvild. Chlorine-Containing Natural Compounds in Higher Plants. Phytochemistry. 1986, 25 (4): 7891–791. doi:10.1016/0031-9422(86)80002-4. 
  53. ^ Gribble, G. W. The Natural production of chlorinated compounds. Environmental Science and Technology. 1994, 28 (7): 310A–319A. Bibcode:1994EnST...28..310G. PMID 22662801. doi:10.1021/es00056a712. 
  54. ^ Gribble, G. W. Naturally occurring organohalogen compounds - A comprehensive survey. Progress in the Chemistry of Organic Natural Products. 1996, 68 (10): 1–423. PMID 8795309. doi:10.1021/np50088a001. 
  55. ^ Public Health Statement – Chloromethane 互聯網檔案館的存檔，存檔日期2007-09-27., Centers for Disease Control, Agency for Toxic Substances and Disease Registry
  56. ^ Connell, D.; et al. Introduction to Ecotoxicology. Blackwell Science. 1999: 68. ISBN 978-0-632-03852-7. 
  57. ^ Greenwood and Earnshaw, p. 795
  58. ^ Holleman, Arnold Frederik; Wiberg, Egon, Wiberg, Nils , 編, Inorganic Chemistry, 由Eagleson, Mary; Brewer, William翻譯, San Diego/Berlin: Academic Press/De Gruyter: 408, 2001, ISBN 0-12-352651-5 
  59. ^ The diaphragm cell process. Euro Chlor. [2007-08-15]. （原始內容存檔於2011-11-11）. 
  60. ^ The membrane cell process. Euro Chlor. [2007-08-15]. （原始內容存檔於2011-11-11）. 
  61. ^ Schmittinger, Peter et al. (2006) "Chlorine" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH Verlag GmbH & Co., doi:10.1002/14356007.a06_399.pub2
  62. ^ 62.0 62.1 62.2 Greenwood and Earnshaw, pp. 796–800
  63. ^ Greenwood 1997，第798頁.
  64. ^ Greenwood 1997，第793頁.
  65. ^ 65.0 65.1 Hoefer, Jean Chrétien Ferdinand (編). Labarraque, Antoine-Germain. Nouvelle biographie universelle 28. : 323–24. OL 24229911M. 
  66. ^ 66.0 66.1 Knight, Charles. Arts and sciences 1. Bradbury, Evans & Co. 1867: 427. 
  67. ^ Bouvet, Maurice. Les grands pharmaciens: Labarraque (1777–1850) [The great pharmacists: Labarraque (1777–1850)]. Revue d'Histoire de la Pharmacie. 1950, 38 (128): 97–107. doi:10.3406/pharm.1950.8662 （French）. 
  68. ^ Gédéon, Andras. Science and technology in medicine. Springer. 2006: 181–82. ISBN 978-0-387-27874-2. （原始內容存檔於2015-12-31）. 
  69. ^ Labarraque, Antoine Germain. On the disinfecting properties of Labarraque's preparations of chlorine. Translated by James Scott. 1828: 8. （原始內容存檔於2015-12-31）. 
  70. ^ Scott, James (trans.). On the disinfecting properties of Labarraque's preparations of chlorine 互聯網檔案館的存檔，存檔日期2015-12-31. (S. Highley, 1828) Accessed Nov 1, 2011.
  71. ^ Corbin, Alain (1988). The Foul and the Fragrant: Odor and the French Social Imagination 互聯網檔案館的存檔，存檔日期2015-12-31.. Harvard University Press. pp. 121–22.
  72. ^ Lewis, Kenneth A. Ch. 9 Hypochlorination – Sodium Hypochlorite (PDF). White's Handbook of Chlorination and Alternative Disinfectants. Hoboken, NJ: Wiley. 2010: 452. ISBN 978-0-470-56133-1. doi:10.1002/9780470561331.ch9. [永久失效連結]
  73. ^ 73.0 73.1 Vinten-Johansen, Peter, Howard Brody, Nigel Paneth, Stephen Rachman and Michael Rip. (2003). Cholera, Chloroform, and the Science of Medicine. New York:Oxford University.
  74. ^ Hemphill, Sandra. (2007). The Strange Case of the Broad Street Pump: John Snow and the Mystery of Cholera. Los Angeles:University of California
  75. ^ Johnson, Steven. (2006). The Ghost Map: The Story of London's Most Terrifying Epidemic and How It Changed Science, Cities, and the Modern World. New York :Riverhead Books
  76. ^ Chlorine Story. americanchemistry. [2008-07-10]. （原始內容存檔於2011-04-29）.  無效|deadurl=bot: unknown (幫助)
  77. ^ Rezayat, C.; Widmann, W. D.; Hardy, M. A. Henry Drysdale Dakin: More Than His Solution. Current Surgery. 2006, 63 (3): 194–96. PMID 16757372. doi:10.1016/j.cursur.2006.04.009. 
  78. ^ Joseph Cotruvo, Victor Kimm, Arden Calvert. 「Drinking Water: A Half Century of Progress.」 EPA Alumni Association. March 1, 2016.
  79. ^ Hammond, C. R. The Elements, in Handbook of Chemistry and Physics 81st. CRC press. 2000. ISBN 978-0-8493-0481-1. 
  80. ^ Koski T. A.; Stuart L. S.; Ortenzio L. F. Comparison of chlorine, bromine, iodine as disinfectants for swimming pool water. Applied Microbiology. 1966, 14 (2): 276–79. PMC 546668  . PMID 4959984. 
  81. ^ Disinfection with chloramine. Centers for Disease Control and Prevention (CDC). Atlanta, Georgia, USA. [2019-01-20]. （原始內容存檔於2019-01-20）. 
  82. ^ Greenwood 1997，第860頁.
  83. ^ Wiberg 2001，第411頁.
  84. ^ "Battle of Ypres" The Canadian Encyclopedia
  85. ^ Everts, Sarah. When Chemicals Became Weapons of War. Chemical & Engineering News. February 23, 2015, 93 (8). （原始內容存檔於March 30, 2016）. 
  86. ^ Smil, Vaclav. Enriching the Earth: Fritz Haber, Carl Bosch, and the Transformation of World Food Production. 2004-04-01: 226. ISBN 978-0-262-69313-4. （原始內容存檔於2015-12-31）. 
  87. ^ Weapons of War: Poison Gas. First World War.com. [2007-08-12]. （原始內容存檔於2007-08-21）. 
  88. ^ Mahdi, Basim. Iraq gas attack makes hundreds ill. CNN. 2007-03-17 [2007-03-17]. （原始內容存檔於2007-03-17）. 
  89. ^ 'Chlorine bomb' hits Iraq village. BBC News. 2007-05-17 [2007-05-17]. （原始內容存檔於2010-12-20）. 
  90. ^ ISIS chlorine attack on security forces confirmed – Iraq officials. RT. October 24, 2014. （原始內容存檔於October 24, 2014）. 
  91. ^ Lab report on chlorine gas usage (PDF). Kurdistan Region Security Council. March 14, 2015. 
  92. ^ Gladstone, Rick. Syria Used Chlorine Bombs Systematically in Aleppo, Report Says. The New York Times. 2017-02-13 [2017-05-10]. （原始內容存檔於2017-05-15）. 
  93. ^ Syrian forces 'drop chlorine' on Aleppo. BBC News. 2016-09-07 [2017-05-10]. （原始內容存檔於2017-05-13）. 
  94. ^ Ignoring UN, Russia and Assad continue Syrian chemical weapons and bombing attacks labeled war crimes. 2017-03-06 [2017-05-11]. （原始內容存檔於2017-04-25）. 
  95. ^ Blood (Serum) Chloride Level Test. [30 April 2010]. （原始內容存檔於31 March 2009）. 
  96. ^ Lavie, CJ; Crocker, EF; Key, KJ; Ferguson, TG. Marked hypochloremic metabolic alkalosis with severe compensatory hypoventilation. South. Med. J. October 1986, 79 (10): 1296–99. PMID 3764530. doi:10.1097/00007611-198610000-00025. 
  97. ^ Levitin, H; Branscome, W; Epstein, FH. The pathogenesis of hypochloremia in respiratory acidosis. J. Clin. Invest. December 1958, 37 (12): 1667–75. PMC 1062852  . PMID 13611033. doi:10.1172/JCI103758. 
  98. ^ Cambier, C; Detry, B; Beerens, D; et al. Effects of hyperchloremia on blood oxygen binding in healthy calves. J. Appl. Physiol. October 1998, 85 (4): 1267–72. PMID 9760315. doi:10.1152/jappl.1998.85.4.1267. 
  99. ^ Chlorine 295132. 
  100. ^ Facts About Chlorine. www.bt.cdc.gov. [2016-04-12]. （原始內容存檔於2016-04-23）.  無效|deadurl=bot: unknown (幫助)
  101. ^ Chlorine MSDS (PDF). 1997-10-23. （原始內容 (PDF)存檔於2007-09-26）. 
  102. ^ NOAA Office of Response and Restoration, US GOV. Chlorine. noaa.gov. [25 August 2015]. （原始內容存檔於15 October 2015）. 
  103. ^ 103.0 103.1 NIOSH Pocket Guide to Chemical Hazards. #0115. NIOSH. 
  104. ^ Winder, Chris. The Toxicology of Chlorine. Environmental Research. 2001, 85 (2): 105–14. Bibcode:2001ER.....85..105W. PMID 11161660. doi:10.1006/enrs.2000.4110. 
  105. ^ What's in your Water?: Disinfectants Create Toxic By-products. ACES News. College of Agricultural, Consumer and Environmental Sciences – University of Illinois at Urbana-Champaign. 2009-03-31 [2009-03-31]. （原始內容存檔於2014-09-03）. 
  106. ^ Richardson, Susan D.; Plewa, Michael J.; Wagner, Elizabeth D.; Schoeny, Rita; DeMarini, David M. Occurrence, genotoxicity, and carcinogenicity of regulated and emerging disinfection by-products in drinking water: A review and roadmap for research. Mutation Research/Reviews in Mutation Research. 2007, 636 (1–3): 178–242. PMID 17980649. doi:10.1016/j.mrrev.2007.09.001. 
  107. ^ Berezow, Alex. Why You Should Never Mix Different Drain Cleaners. Forbes. [2016-04-12]. （原始內容存檔於2016-04-25）. 
  108. ^ Bleach Mixing Dangers : Washington State Dept. of Health. www.doh.wa.gov. [2016-04-12]. （原始內容存檔於2016-04-14）. 
  109. ^ Bertolini, Luca; Elsener, Bernhard; Pedeferri, Pietro; Polder, Rob B. Corrosion of steel in concrete: prevention, diagnosis, repair. Wiley-VCH. 2004: 148. ISBN 978-3-527-30800-2. 
  110. ^ Lewis, P.R. Polymer Product Failure. iSmithers Rapra Publishing. 1 January 2000: 19– [2011-04-30]. ISBN 978-1-85957-192-7. （原始內容存檔於10 May 2013）. 
  111. ^ 111.0 111.1 Chlorine: Product Datasheet (PDF). Bayer MaterialScience AG. 2008-04-21 [2013-12-17]. （原始內容 (PDF)存檔於September 15, 2012）. 
  112. ^ 112.0 112.1 Sanders, Roy E. Chemical Process Safety: Learning from Case Histories, 3rd Revised edition. Oxford: Elsevier Science & Technology. 2004: 92. ISBN 978-0-7506-7749-3. 

Notes

編輯
  1. ^ van Helmont, Joannis Baptistae. Opera omnia [All Works]. Frankfurt-am-Main, (Germany): Johann Just Erythropel. 1682 （Latin）. 出自《Complexionum atque mistionum elementalium figmentum》（各元素化合物及混合物之形成）第37章第105頁：「硝（硝酸鈉）、礬（濃硫酸）、明礬各取一份，去水，並同時混合，再把水（指液體）蒸餾出來。蒸餾出的物質正正就是純揮發性鹽（指硝酸）。取此物（硝酸）四盎司，加入一盎司亞美尼亞鹽（氯化銨），放入穩固的玻璃蒸餾器內，並以很熱的水泥（由蠟、鬆香和玻璃粉製成）密封。不久後，就算在冷的環境下，氣體都會從中釋出，再穩固的容器也會爆裂粉碎。」出自《De Flatibus》（論氣體）第408頁：「亞美尼亞鹽（氯化銨）和硝酸各自都可以分開蒸餾，並加熱；但一旦兩者相合，變暖，則會即刻化為二氧化碳（註：范·海爾蒙特並未正確辨識所生成的氣體）或某種不可凝結的氣體。
    另見：
    • Helmont, Johannes (Joan) Baptista Van, Encyclopedia.Com: "Others were chlorine gas from the reaction of nitric acid and sal ammoniac; … "
    • Wisniak, Jaime (2009) "Carl Wilhelm Scheele," Revista CENIC Ciencias Químicas, 40 (3): 165–173 ; see p. 168: "Early in the seventeenth century Johannes Baptiste van Helmont (1579-1644) mentioned that when sal marin (sodium chloride) or sal ammoniacus and aqua chrysulca (nitric acid) were mixed together, a flatus incoercible (non-condensable gas) was evolved."

Bibliography

編輯
編輯
 
維基共享資源中相關的多媒體資源：Yinweichen/Testpage6

Template:Compact periodic table Template:Chlorine compounds

Template:U.S. chemical weapons Template:Chemical warfare Template:E number infobox 920-929


取自 "https://zh.wikipedia.org/w/index.php?title=User:Yinweichen/Testpage6&oldid=59792336"